[SEC] Lockette - Simple chest and door lock, no databases! [Moved to BukkitDev]

Discussion in 'Inactive/Unsupported Plugins' started by Acru, Feb 14, 2011.

  1. Offline

    Acru

    Lockette - The sign-based container and door lock for Bukkit! - by Acru Jovian

    ElgarL has been assigned as the current maintainer of this project, please forward any important issues to him as well. This post is abandoned, but proceed to BukkitDev for updates.

    Download it at BukkitDev! (Alternate) (JAR) (Source), also view the Change Log on BukkitDev.



    Supported external plugins:
    • Permissions - Permissions/Groups
    • GroupManager - Permissions/Groups
    • PermissionsBukkit - SuperPerms/Groups
    • PermissionsEx - SuperPerms/Groups
    • bPermissions- SuperPerms/Groups
    • Towny - Groups/Zones
    • SimpleClans - Groups
    • mcMMO - Groups (Disabled by default now, due to issues.)
    • Factions - Groups
    • LWC - Zones
    • Register - Economy
    Alternate languages included:
    Confirmed compatible plugins: ColorSign, SpeedSign.
    Conflicting plugins: ChestShop, Most sign editors!


    The active Lockette information page will commute to BukkitDev soon, but the forum thread is still the best place for discussion.



    Overview:

    The purpose of this plugin is to restrict access to the contents of chests, dispensers, furnaces, and doors without the use of a database to track containers.

    To use, simply place a signpost on the floor directly beside a chest or other container to be locked. Enter [Private] as the first line. Your own name will automatically be entered on line 2 as the chest owner. Optionally type in the full names of two other users allowed to access the chest's inventory on lines 3 and 4.

    When done correctly, the sign will automatically fix itself to the side the target chest, protecting it from unauthorized access! Only the chest's owner can then break the sign or chest. (Warning: Anyone with permission to use WorldEdit commands or similar can circumvent the protection by removing the sign.)

    [​IMG]

    Additionally, you can enter [Everyone] on lines 3 or 4 instead of a user name to allow everyone access to the contents of a private container, or [Operators] to allow ops access. If a Permissions plugin is available, you can use groups like [Moderator] or [Admins] or others as defined in the Permissions settings files.

    The owner of a container can add more users by placing additional signs beside the container with the heading [More Users], where lines 2-4 specify the names of the additional users. You can edit the users on previously placed signs by right clicking the sign, and using the command '/lockette <line number> <text>' to change it.


    Working with Doors:

    To protect a door, you can use the same method as protecting a container, the sign will attach to the door automatically. In addition, you can attach a [Private] wall sign to any side of the blocks just above or just below a door. For double doors only one side needs a sign. Door support is enabled by default in the config file.

    Once a door is protected it will only open for someone listed as a user, and will not respond to redstone power or switches unless [Everyone] is listed as a user. Iron doors which usually won't open from clicking will work just as wooden doors. In addition, double doors will open together automatically!

    You can also use [More Users] signs as with containers, with the caveat that the sign cannot be placed on the block above the door if the [Private] sign is not above the door as well! (This is done to prevent a security uncertainty issue.)

    Protected doors will be closed automatically if a timer is set. A timer can be set globally with a configuration option, or individually for each door by using the tag [Timer: #] on line 3 or 4 of the [Private] sign, where # is the number of seconds that the door should remain open. If the timer is set to 0, this means the door will never automatically close. If no timer is specified, protected doors will use a global timer set in the configuration file. If the server is shut down cleanly any open doors will be closed, but in the event of a server crash while a door is open, it may remain so. Note that the initial state of a door is assumed to be closed.

    Care must me taken to place protected doors on a stable block. Building a door on sand, gravel, leaves, TNT and et cetera are allowed by the plugin, but cannot be secured fully. :3 Additionally, it should be noted that most status messages still refer to locked blocks as containers, so for the purpose of simplicity, doors should be considered as a type of container.


    Features:
    • No passwords or databases needed!
    • Permission checks run in constant time, no matter how many protected containers.
      • One owner and up to 11 additional users supported. (17 for double chests!)
      • Allows access to [Everyone] while still protecting the container from vandalism.
      • Allows group names in conjunction with many other plugins.
    • Special powers for ops or admins, configurable with permissions.
      • Reports when an admin does something naughty.
    • Protects single and double chests, dispensers, and furnaces.
      • Explosion and block-break protection for the protected container and sign.
        • Option to protect all containers from explosions.
    • Full support for doors, both wooden and iron!
      • Double doors are handled automatically, with no redstone.
      • Doors can be set to close automatically, via a timer setting.
      • Redstone hacking is disabled for protected doors.
    • Prevents creation of chests larger than 2 blocks.
    • Informative or helpful messages when interacting with containers.
      • The first time a chest is placed, a help message will be shown.
      • Types of messages shown are configurable in settings.
      • Additional language support.

    Advanced Setup (Permissions) (open)

    Advanced Setup:
    There are a few things you can now customize in the configuration files for the plugin, found in the plugins/Lockette folder. After running the plugin for the first time, two files will be created, config.yml and strings.yml. The first holds the following settings:
    • enable-permissions - Allows the use of permission nodes to specify who can do what. If this is disabled, groups will still be used but admin status is taken from the ops file. Defaults to false.
    • enable-messages-* - Enables or disables groups of messages listed in the strings.yml file. Not counting the broadcast ones.
    • broadcast-*-target - Sets the group or player that specific broadcast messages should be sent to. This can be set to "" for no one.
    • explosion-protection-all - Enabling this extends explosion protection to all containers on the server, not just [Private] ones. Default is disabled.
    • allow-admin-bypass - Allows admins to go though any protected door. Default is true.
    • allow-admin-snoop - Allows admins to peek into chests owned by other people. Default is false, and this setting is recommended! A broadcast message will be sent each time an admin snoops in a protected container where the admin doesn't have permission to. The message will be sent to a player or group as specified in another option. Admins can still break protection on chests if this is disabled, however.
    • enable-protection-doors - Enables support for private doors, defaults to true.
    • default-door-timer - Sets the door closing timer for all protected doors on the server, unless overridden by a specific sign. Defaults to 0, which disables the door closing timer.
    In the strings.yml file, you can set alternate language tags for [Private] and such, in ANSI format. If you need characters not in ANSI then you might try UTF-8 format, though it seems bugged tight now. The default alternate tags are in French, but server ops are free to translate the whole file into the language of their choice. If you do this, please share it back to me~ :3 If you want to disable only a specific message, you can set it to "", the empty string. Admins can use the command '/lockette reload' after editing the configuration files, to reload them.

    If a Permissions plugin is not available or the enable-permissions option is set to false, Lockette will use the ops file to determine who are admins. Admins can break the protection on any chest, and look inside protected chests (only if the related option is set), as well as reload the plugins configuration files. All non-ops will be able to create protected containers for themselves.

    If a Permissions plugin is available and the enable-permissions option is set to true, the following nodes will be used instead of the ops file and are included by default in the '*' node:
    • lockette.user.create.* - Permission required to create a protected container or door. Possible sub-nodes include chest, dispenser, furnace, and door. (The permission lockette.create.all is still supported, but obsolete.)
    • lockette.admin.create.* - Allows admins to create containers and doors for other users. Possible sub-nodes include chest, dispenser, furnace, and door. Leave line 2 blank for the default behavior or enter the name of your choice. Capitalization matters.
    • lockette.admin.break - Allows breaking protection on containers.
    • lockette.admin.bypass - Allows opening of any locked door.
    • lockette.admin.snoop - Allows peeking in protected containers. (The setting allow-admin-snoop must be true.)
    • lockette.admin.reload - Allows use of the reload command.

    Technical Information (open)

    Technical Information:

    This plugin has been tested and shown to be working for many builds of CraftBucket though a number of the more recent builds had a serious issue, so I'm suggesting a minimum build of 561 now. If you update past what is listed in the post's title and the plugin seems to break, it is probably not my fault. Post a note anyway and I'll see about fixing. I'll try and keep up with the new recommended build system, but for latest builds that break things, you should expect some time to pass before I take care of the issue, as this plugin is now mature. :3

    If there are multiple containers by the placed sign, the plugin will use the NESW rule to choose the first container that is not yet private. To elaborate, the plugin will check to the north of the sign first, and if no container or door is available to the north, it will continue checking clockwise around the sign.

    Due to the current implementation of the explosion event, this plugin will cancel all explosions that would damage the container or sign, rather than just remove the container and sign from the blocks to be damaged. Canceled explosions still knock signs off the walls. Canceled explosions leave signs looking blank, but this is just a graphic glitch, reconnect to fix.

    Bonus: This plugin will prevent chests bigger than 2 blocks from being created via glitches. (Again, this could be circumvented using WorldEdit commands, so take care who has access to such a plugin.)

    This plugin was inspired by the old hmod plugins Lock by Roman "kingseta" Pramberger and ChestCapsule by Fernando "Fergo".

    Hooking into Lockette (open)

    Hooking into Lockette:

    If you are a plugin author and want to connect to Lockette, you can use a public static function to get information about the protected status of a block.

    More info later, perhaps, but if you need the details now then go poke through the source~

    Future Possibilities:

    There are a number of things that have been suggested, and they tend to be added to the list below if I think they might be a good idea. However, some sort of locked container limit is requested often but this is not possible without a database to track the number of locked containers someone has. All things considered, this will not be supported. On the up side, without a database you can have literally millions of locked containers without any sort of lag, and there are permissions to restrict who can create locked chests. Perhaps only allow Moderators to create locked chests for other users, if you don't want to allow infinite locked chests.

    Aside what has already been implemented, the following may or may not appear in future versions:
    • Furnace/dispenser clusters, protected by a single sign.
    • [Log] sign to list recent users of a container or door.
    • iConomy fee for protecting containers/doors.
    • Worldguard connection.
    • [Protected] tag for viewing only.
    • Specific time range that doors can be opened.
    • DataLog plugin support.
    • More types of protected blocks, such as brewing stands.
    If you want any of the above features sooner than never, let me know! However, I currently see Lockette as functionally complete, for the most part, in that it already has all the functionality it needs. Future updates will mostly be to account for changes in Minecraft and Bukkit.


    Final Note:

    Please leave a reply if there are any bugs or suggestions, and if you like this plugin you can click the like button at the bottom of this post~ Thanks to those few that have donated! [​IMG]
     
  2. Offline

    TnT Retired Staff

    The topic of this post is not "How do I setup a server". Please keep on topic. There is a help section for posting help requests.
     
    Inscrutable likes this.
  3. Offline

    xT3Cno HUNT3Rx

    @TnT in the post i did say asking him a question
    also i have a server, just a few plugins i don't know how to setup i know how to install them just theirs some i don't know how to set up. also it looked like he knew his stuff. sorry for upsetting you :eek:
     
  4. Offline

    TnT Retired Staff

    I'm not upset (not sure why I would be), just trying to guide you into the best areas to get help.
     
  5. Offline

    Helladen

    I was using a much older build, the one on the homepage, thank you (upgraded to the latest). :)
     
  6. Offline

    xT3Cno HUNT3Rx

    @TnT well to be honest im not desperate for help. but i thought Greylocke knew his stuff about a PermissionsBukkit and bPermissions and would like to know if he knows any tips and stuff he could tell me saving me from searching for help.
     
  7. Offline

    Harrison Smith

    I'm a lowly player who was just checking the OP for each of our server's plugins, so I haven't read the entire thread.

    That said, is it possible for you to allow levers and buttons to be private the same way doors are? Outside of the privacy uses, it would also allow for a low-resource way to set up a short clock functions in SMP. Since your doors remember their starting state, could you do the same to levers?
     
  8. Offline

    Kane

    @Acru Any chance of adding that custom blocks idea from Oct? LWC Has something like that and EWWW can't let them do that now :)
     
  9. Offline

    dumle29

    So, just a tip: The download link didnt work for me, but if you use Linux you can use wget in terminal, seems to help often when a link doesnt work.

    (to use it, navigate to the folder where you want to save it, for example "cd Documents", then do wget http://members.shaw.ca/acru/Lockette.jar and it should download.)
     
  10. Offline

    8Keep

    Hey, is there any way that i can charge people for protecting chests? Charge Iconomy money preferably.
    Thanks!
     
  11. Offline

    Greylocke

    @8Keep iConomy is on the "Future Possibilites" list in the OP.
     
  12. Offline

    dumle29

    @Acru have translated the file to Danish. put it on my website: http://snuletek.com/ting/strings-da.yml.zip

    Im not entirely sure its legit UTF-8 (since im not 100% sure what UTF-8 is) since it includes special characters æøå. It does however work, and shows those special characters :)

    Thanks for an awesome plugin :D
     
  13. Offline

    Coelho

    Placing a block like a fence underneath a chest will override the protection and break the chest. This completely destroys the idea of "protection" and is in need of urgent fix.
     
  14. Offline

    generilisk

    Just sayin'.
     
  15. Offline

    Coelho

    Thanks a bunch, guess my eyes slipped.
     
  16. Offline

    lishid

    @Acru
    FYI, The incompatibility with OpenInv is fixed a long time ago and the older version is no longer used.

    I think it's safe to remove the warning.
     
  17. Offline

    cataclym

    where can I get it for 1.1??
     
  18. Offline

    Colin4567

    I don't think that it's out yet. Remember, even the Bukkit team hasn't gotten a 1.1 build out yet, and they have a team! The mods are usually a one-man show: only 1 person works on it. You have to expect to wait a little longer.
     
  19. Offline

    troed

    I'm using Lockette v1.4.9b on a v1.1-devbuild server with no issues I've noticed anyway.
     
  20. Offline

    cr532

    can someone tell me what the plugin name is

    and is there 1.1

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jul 18, 2016
  21. Offline

    Ladinn

    Warning! Causes lag on larger servers.

    When we reach about 80 players online- we start lagging a lot. Found out through weeks of research (yes, weeks) that the signs on chests cause lag. This is true on my server, (VaultCraft) the ShadowRaze, and LegendaryCraft.

    Though this plugin works great for un-commercialized servers ;)
     
  22. Offline

    Dooderdo

    I am not sure if this topic has already been brought up by my users seem to be able to use color on their signs with this plugin... Is there a fix to this?
     
  23. Offline

    ledhead900

    Code:
    2012-01-19 00:39:09 [SEVERE] Could not pass event PLAYER_INTERACT to Lockette
    java.lang.ClassCastException: com.massivecraft.factions.P cannot be cast to com.massivecraft.factions.Factions
    at org.yi.acru.bukkit.PluginCoreLink.getFactions(PluginCoreLink.java:72)
    at org.yi.acru.bukkit.PluginCore.inGroup(PluginCore.java:539)
    at org.yi.acru.bukkit.PluginCore.inGroup(PluginCore.java:441)
    at org.yi.acru.bukkit.Lockette.LocketteBlockListener.canInteract(LocketteBlockListener.java:1320)
    at org.yi.acru.bukkit.Lockette.LocketteBlockListener.interactDoor(LocketteBlockListener.java:1153)
    at org.yi.acru.bukkit.Lockette.LockettePlayerListener.onPlayerInteract(LockettePlayerListener.java:193)
    at org.bukkit.plugin.java.JavaPluginLoader$11.execute(JavaPluginLoader.java:335)
    at org.bukkit.plugin.RegisteredListener.callEvent(RegisteredListener.java:58)
    at org.bukkit.plugin.SimplePluginManager.callEvent(SimplePluginManager.java:339)
    at org.bukkit.craftbukkit.event.CraftEventFactory.callPlayerInteractEvent(CraftEventFactory.java:178)
    at net.minecraft.server.ItemInWorldManager.interact(ItemInWorldManager.java:266)
    at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:593)
    at net.minecraft.server.Packet15Place.a(SourceFile:39)
    at net.minecraft.server.NetworkManager.b(NetworkManager.java:226)
    at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:93)
    at org.getspout.spout.SpoutNetServerHandler.a(SpoutNetServerHandler.java:550)
    at net.minecraft.server.NetworkListenThread.a(SourceFile:108)
    at net.minecraft.server.MinecraftServer.w(MinecraftServer.java:527)
    at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:425)
    at net.minecraft.server.ThreadServerApplication.run(SourceFile:457)
    
    Plugin needs an update I think, Running on Reco R1 build 1.0 and Factions 1.6.2 and the current Beta build of this.

    Mod Edit (TnT): Use
    Code:
    [code]
    tags please.
     
  24. Offline

    Gimlao

    Acru

    As you can see, writing [Private] on a sign above a trapdoor won't work.

    [​IMG]

    So, could you make trapdoors protection working like this ?
     
  25. Offline

    Cha0sPudd1ng

    Hi Acru,

    what think you from a "Copy Sign" function?
     
  26. Offline

    Guenael

    When i use lockette for doors, doors open but i cannot enter, and the timer still on with default-door-timer: 0

    I cannot stop the auto close doors.

    I use R1.1 with lockette 1.49
     
  27. Offline

    OkinKun

    Is there a reason why the BukkitDev page for Lockette is gone? :confused:
     
  28. Offline

    Greylocke

    it is still there. But it looks like it is currently a WIP.
     
  29. Offline

    rockxz2135

    There is a bug that breaks the lockette when a fence gate is placed under a chest!
     
  30. Offline

    LiamSully

    We've got the fence gate bug but when I updated to the latest version it doesn't support groups which we have on the majority of our lockettes. Any help?
     
  31. Offline

    Shooty

    Acru can you add SimpleClan support ? Few months ago you say to me you'll look into that but no news :/
     

Share This Page