[SEC] Lockette - Simple chest and door lock, no databases! [Moved to BukkitDev]

Discussion in 'Inactive/Unsupported Plugins' started by Acru, Feb 14, 2011.

  1. Offline


    Lockette - The sign-based container and door lock for Bukkit! - by Acru Jovian

    ElgarL has been assigned as the current maintainer of this project, please forward any important issues to him as well. This post is abandoned, but proceed to BukkitDev for updates.

    Download it at BukkitDev! (Alternate) (JAR) (Source), also view the Change Log on BukkitDev.

    Supported external plugins:
    • Permissions - Permissions/Groups
    • GroupManager - Permissions/Groups
    • PermissionsBukkit - SuperPerms/Groups
    • PermissionsEx - SuperPerms/Groups
    • bPermissions- SuperPerms/Groups
    • Towny - Groups/Zones
    • SimpleClans - Groups
    • mcMMO - Groups (Disabled by default now, due to issues.)
    • Factions - Groups
    • LWC - Zones
    • Register - Economy
    Alternate languages included:
    Confirmed compatible plugins: ColorSign, SpeedSign.
    Conflicting plugins: ChestShop, Most sign editors!

    The active Lockette information page will commute to BukkitDev soon, but the forum thread is still the best place for discussion.


    The purpose of this plugin is to restrict access to the contents of chests, dispensers, furnaces, and doors without the use of a database to track containers.

    To use, simply place a signpost on the floor directly beside a chest or other container to be locked. Enter [Private] as the first line. Your own name will automatically be entered on line 2 as the chest owner. Optionally type in the full names of two other users allowed to access the chest's inventory on lines 3 and 4.

    When done correctly, the sign will automatically fix itself to the side the target chest, protecting it from unauthorized access! Only the chest's owner can then break the sign or chest. (Warning: Anyone with permission to use WorldEdit commands or similar can circumvent the protection by removing the sign.)


    Additionally, you can enter [Everyone] on lines 3 or 4 instead of a user name to allow everyone access to the contents of a private container, or [Operators] to allow ops access. If a Permissions plugin is available, you can use groups like [Moderator] or [Admins] or others as defined in the Permissions settings files.

    The owner of a container can add more users by placing additional signs beside the container with the heading [More Users], where lines 2-4 specify the names of the additional users. You can edit the users on previously placed signs by right clicking the sign, and using the command '/lockette <line number> <text>' to change it.

    Working with Doors:

    To protect a door, you can use the same method as protecting a container, the sign will attach to the door automatically. In addition, you can attach a [Private] wall sign to any side of the blocks just above or just below a door. For double doors only one side needs a sign. Door support is enabled by default in the config file.

    Once a door is protected it will only open for someone listed as a user, and will not respond to redstone power or switches unless [Everyone] is listed as a user. Iron doors which usually won't open from clicking will work just as wooden doors. In addition, double doors will open together automatically!

    You can also use [More Users] signs as with containers, with the caveat that the sign cannot be placed on the block above the door if the [Private] sign is not above the door as well! (This is done to prevent a security uncertainty issue.)

    Protected doors will be closed automatically if a timer is set. A timer can be set globally with a configuration option, or individually for each door by using the tag [Timer: #] on line 3 or 4 of the [Private] sign, where # is the number of seconds that the door should remain open. If the timer is set to 0, this means the door will never automatically close. If no timer is specified, protected doors will use a global timer set in the configuration file. If the server is shut down cleanly any open doors will be closed, but in the event of a server crash while a door is open, it may remain so. Note that the initial state of a door is assumed to be closed.

    Care must me taken to place protected doors on a stable block. Building a door on sand, gravel, leaves, TNT and et cetera are allowed by the plugin, but cannot be secured fully. :3 Additionally, it should be noted that most status messages still refer to locked blocks as containers, so for the purpose of simplicity, doors should be considered as a type of container.

    • No passwords or databases needed!
    • Permission checks run in constant time, no matter how many protected containers.
      • One owner and up to 11 additional users supported. (17 for double chests!)
      • Allows access to [Everyone] while still protecting the container from vandalism.
      • Allows group names in conjunction with many other plugins.
    • Special powers for ops or admins, configurable with permissions.
      • Reports when an admin does something naughty.
    • Protects single and double chests, dispensers, and furnaces.
      • Explosion and block-break protection for the protected container and sign.
        • Option to protect all containers from explosions.
    • Full support for doors, both wooden and iron!
      • Double doors are handled automatically, with no redstone.
      • Doors can be set to close automatically, via a timer setting.
      • Redstone hacking is disabled for protected doors.
    • Prevents creation of chests larger than 2 blocks.
    • Informative or helpful messages when interacting with containers.
      • The first time a chest is placed, a help message will be shown.
      • Types of messages shown are configurable in settings.
      • Additional language support.

    Advanced Setup (Permissions) (open)

    Advanced Setup:
    There are a few things you can now customize in the configuration files for the plugin, found in the plugins/Lockette folder. After running the plugin for the first time, two files will be created, config.yml and strings.yml. The first holds the following settings:
    • enable-permissions - Allows the use of permission nodes to specify who can do what. If this is disabled, groups will still be used but admin status is taken from the ops file. Defaults to false.
    • enable-messages-* - Enables or disables groups of messages listed in the strings.yml file. Not counting the broadcast ones.
    • broadcast-*-target - Sets the group or player that specific broadcast messages should be sent to. This can be set to "" for no one.
    • explosion-protection-all - Enabling this extends explosion protection to all containers on the server, not just [Private] ones. Default is disabled.
    • allow-admin-bypass - Allows admins to go though any protected door. Default is true.
    • allow-admin-snoop - Allows admins to peek into chests owned by other people. Default is false, and this setting is recommended! A broadcast message will be sent each time an admin snoops in a protected container where the admin doesn't have permission to. The message will be sent to a player or group as specified in another option. Admins can still break protection on chests if this is disabled, however.
    • enable-protection-doors - Enables support for private doors, defaults to true.
    • default-door-timer - Sets the door closing timer for all protected doors on the server, unless overridden by a specific sign. Defaults to 0, which disables the door closing timer.
    In the strings.yml file, you can set alternate language tags for [Private] and such, in ANSI format. If you need characters not in ANSI then you might try UTF-8 format, though it seems bugged tight now. The default alternate tags are in French, but server ops are free to translate the whole file into the language of their choice. If you do this, please share it back to me~ :3 If you want to disable only a specific message, you can set it to "", the empty string. Admins can use the command '/lockette reload' after editing the configuration files, to reload them.

    If a Permissions plugin is not available or the enable-permissions option is set to false, Lockette will use the ops file to determine who are admins. Admins can break the protection on any chest, and look inside protected chests (only if the related option is set), as well as reload the plugins configuration files. All non-ops will be able to create protected containers for themselves.

    If a Permissions plugin is available and the enable-permissions option is set to true, the following nodes will be used instead of the ops file and are included by default in the '*' node:
    • lockette.user.create.* - Permission required to create a protected container or door. Possible sub-nodes include chest, dispenser, furnace, and door. (The permission lockette.create.all is still supported, but obsolete.)
    • lockette.admin.create.* - Allows admins to create containers and doors for other users. Possible sub-nodes include chest, dispenser, furnace, and door. Leave line 2 blank for the default behavior or enter the name of your choice. Capitalization matters.
    • lockette.admin.break - Allows breaking protection on containers.
    • lockette.admin.bypass - Allows opening of any locked door.
    • lockette.admin.snoop - Allows peeking in protected containers. (The setting allow-admin-snoop must be true.)
    • lockette.admin.reload - Allows use of the reload command.

    Technical Information (open)

    Technical Information:

    This plugin has been tested and shown to be working for many builds of CraftBucket though a number of the more recent builds had a serious issue, so I'm suggesting a minimum build of 561 now. If you update past what is listed in the post's title and the plugin seems to break, it is probably not my fault. Post a note anyway and I'll see about fixing. I'll try and keep up with the new recommended build system, but for latest builds that break things, you should expect some time to pass before I take care of the issue, as this plugin is now mature. :3

    If there are multiple containers by the placed sign, the plugin will use the NESW rule to choose the first container that is not yet private. To elaborate, the plugin will check to the north of the sign first, and if no container or door is available to the north, it will continue checking clockwise around the sign.

    Due to the current implementation of the explosion event, this plugin will cancel all explosions that would damage the container or sign, rather than just remove the container and sign from the blocks to be damaged. Canceled explosions still knock signs off the walls. Canceled explosions leave signs looking blank, but this is just a graphic glitch, reconnect to fix.

    Bonus: This plugin will prevent chests bigger than 2 blocks from being created via glitches. (Again, this could be circumvented using WorldEdit commands, so take care who has access to such a plugin.)

    This plugin was inspired by the old hmod plugins Lock by Roman "kingseta" Pramberger and ChestCapsule by Fernando "Fergo".

    Hooking into Lockette (open)

    Hooking into Lockette:

    If you are a plugin author and want to connect to Lockette, you can use a public static function to get information about the protected status of a block.

    More info later, perhaps, but if you need the details now then go poke through the source~

    Future Possibilities:

    There are a number of things that have been suggested, and they tend to be added to the list below if I think they might be a good idea. However, some sort of locked container limit is requested often but this is not possible without a database to track the number of locked containers someone has. All things considered, this will not be supported. On the up side, without a database you can have literally millions of locked containers without any sort of lag, and there are permissions to restrict who can create locked chests. Perhaps only allow Moderators to create locked chests for other users, if you don't want to allow infinite locked chests.

    Aside what has already been implemented, the following may or may not appear in future versions:
    • Furnace/dispenser clusters, protected by a single sign.
    • [Log] sign to list recent users of a container or door.
    • iConomy fee for protecting containers/doors.
    • Worldguard connection.
    • [Protected] tag for viewing only.
    • Specific time range that doors can be opened.
    • DataLog plugin support.
    • More types of protected blocks, such as brewing stands.
    If you want any of the above features sooner than never, let me know! However, I currently see Lockette as functionally complete, for the most part, in that it already has all the functionality it needs. Future updates will mostly be to account for changes in Minecraft and Bukkit.

    Final Note:

    Please leave a reply if there are any bugs or suggestions, and if you like this plugin you can click the like button at the bottom of this post~ Thanks to those few that have donated! [​IMG]
  2. Offline


    I'm using Lockette and it works well when I use "Private". But it doesn't work anymore with the french word "Privé".
    Someone had the same problem? :/
  3. Offline


    I do use Towny and I am using the latest as of 2 days ago. I entered "mangaddp builder lockette.towny.wilds and also did lockette.towny.*" and i still have the same error. I am talking with other server owners similar to mine they are all having the same problem even when not using towny.
  4. Offline


    I made it so the language is configurable.

    For the french language, in plugins/Lockette/config.yml:
    strings-file-name: strings-fr.yml

    Or you could make your own, but the default english language strings.yml now lists Private instead of Privé, as it is used for the new quick-protect.

    Nothing has been changed in that area. Any more details?

    Jotschie darxler and Hryniu seems to have gotten it working with the lockette.towny.wilds, no response yet from Tanjer1588, and that just leaves you~

    You said you are using the latest GroupManager? (Essentials one?) What is the version exactly?

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: Jul 18, 2016
  5. Offline


    Hello can you please and try do that thing a requested would be amazing and alot of people would find it handy so like some rights a commands then right clicks the chest, door, ect. and it will lock it and place a sign there so its easy for people to use this plugin in protected areas please take this to thinking and please do it soon thanks alot :D
  6. Offline


    @Acru the towny issue seems to work for me, the issue for me was i needed to enable permissions in the config :)
    alls good
  7. Offline


    It simply doesn't work as if it didn't exist. Can you please look up making a [Everyone] sign manually, to confirm that?
    No errors.
  8. Offline


    ETA on removal of dependency : superpemsbridge ? I'd prefer to use this over deadbolt.
  9. Offline


    The next release, I expect. (One reason for the lull in updates recently, upgrading to a newer bukkit dependency. This will bump the min build up to 588 at least, perhaps higher, but at this point I doubt it is an issue to anyone. :3)
  10. Offline


    Thank you for the reply, Acru. Excellent news.
  11. Offline


    Very happy to see that you (re)decided to continue updating this! My server loves this plugin.
  12. Offline


    Very nice plugin! :)
    But could you try to add this function to "Minecart with Chest" and "Minecart with Furnace", please?
    Then it's perfect! :D
  13. Offline


    How do You download it for mac computer PLEASE HELP!!!!!!:)
  14. Umm, what are you talking about? Just download it.
  15. Offline


    Heh, ya can't slap a sign on a minecart, it would just roll away~
  16. Offline

    Donald Scott

    Just so you know, the piston extend event code is broken in the lastest dev bukkit build.
  17. Offline


    im using permissionsbukkit and ive given all the right commands and set use-permissions to true. and when i boot my server up it says that its using ops file for permissions. So it wont let admins with the commands open doors or chest with out being /oped
  18. Offline


  19. Offline


  20. Offline


    You'll need to use superpermbridge if you want to fix your issue.
    The linked post.
  21. Offline


    ohh alright. will that change anything else in my server?

    now im getting a permission to lock container denied. even though i have lockette.user.create.*

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: Jul 18, 2016
  22. Offline


    Thanks a lot! this was what my server was missing great job :)
  23. Offline


    I am playing on a server with LavaFurnace, CreeperKamakazi, TeslaCoils and Lockette intstalled. I am experiencing an odd bug where I can't lock any doors, I have tried putting the [private] sign on both door blocks and all of the blocks around the door, but it just tells the people who bypass it: (In red) "You have bypassed a container locked by atrain99."
    Do you have any ideas on how to fix this?
  24. Offline



    It seems that the following strings can not be translated anymore:
    alternate-private-tag: Private
    alternate-moreusers-tag: More Users
    alternate-everyone-tag: Everyone
    alternate-operators-tag: Operators
    alternate-timer-tag: Timer
    msg-help-command1: /lockette <line number> <text> - Edits  signs on locked containers. Right click on the sign to edit.
    msg-help-command2: /lockette fix - Fixes an automatic door that is in the wrong position. Look at the door to edit.
    msg-help-command3: /lockette reload - Reloads the configuration files.  Operators only.
    msg-help-command4: /lockette version - Reports Lockette version string.
    As I have translated these strings on my server, all my protected chests and doors are now broken.
    Can you please restore this feature?

    Keep up the great work!
  25. Offline


    If you mean the java.lang.ClassCastException, I have a fix for it I think.

    If you are using Towny and are in the wilds, be sure you have the permission lockette.towny.wilds too.

    If permissions are disabled, anyone who is op can bypass doors.
    Otherwise anyone with the permission lockette.admin.bypass can bypass doors.

    I thought on how to work around this issue, but for now you can rename the strings.yml to something like stringscustom.yml, and update the filename in the config file. Some of the text in strings.yml are being set to default english values on load.

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: Jul 18, 2016
  26. Offline

    Donald Scott

    Yes, that. Can I have a beta build please? :D
  27. Offline


    I have some time now, I'm working on it. :3
  28. Offline


    Good evening, it is not possible to ensure that players 'classic' (without specific permission) can notsecure their chest!?
  29. Offline


    I'm not quite sure what you are asking, but;

    If permissions is not enabled, everyone can lock with lockette.
    If permissions is enabled, players need the lockette.user.create.* permission to lock with lockette.
  30. Offline


    Sorry, i use GoogleTranslator...

    I use Lockette with bukkitpermission, yet all the players can secure their chests.
    And I only have a right to secure group
  31. There is your problem, if I understand correctly. Lockette doesn't natively support SuperPerms. If you are using PermissionsBukkit, you need to install the bridge.

Share This Page