[SEC] Lockette - Simple chest and door lock, no databases! [Moved to BukkitDev]

Discussion in 'Inactive/Unsupported Plugins' started by Acru, Feb 14, 2011.

  1. Offline

    Acru

    Lockette - The sign-based container and door lock for Bukkit! - by Acru Jovian

    ElgarL has been assigned as the current maintainer of this project, please forward any important issues to him as well. This post is abandoned, but proceed to BukkitDev for updates.

    Download it at BukkitDev! (Alternate) (JAR) (Source), also view the Change Log on BukkitDev.



    Supported external plugins:
    • Permissions - Permissions/Groups
    • GroupManager - Permissions/Groups
    • PermissionsBukkit - SuperPerms/Groups
    • PermissionsEx - SuperPerms/Groups
    • bPermissions- SuperPerms/Groups
    • Towny - Groups/Zones
    • SimpleClans - Groups
    • mcMMO - Groups (Disabled by default now, due to issues.)
    • Factions - Groups
    • LWC - Zones
    • Register - Economy
    Alternate languages included:
    Confirmed compatible plugins: ColorSign, SpeedSign.
    Conflicting plugins: ChestShop, Most sign editors!


    The active Lockette information page will commute to BukkitDev soon, but the forum thread is still the best place for discussion.



    Overview:

    The purpose of this plugin is to restrict access to the contents of chests, dispensers, furnaces, and doors without the use of a database to track containers.

    To use, simply place a signpost on the floor directly beside a chest or other container to be locked. Enter [Private] as the first line. Your own name will automatically be entered on line 2 as the chest owner. Optionally type in the full names of two other users allowed to access the chest's inventory on lines 3 and 4.

    When done correctly, the sign will automatically fix itself to the side the target chest, protecting it from unauthorized access! Only the chest's owner can then break the sign or chest. (Warning: Anyone with permission to use WorldEdit commands or similar can circumvent the protection by removing the sign.)

    [​IMG]

    Additionally, you can enter [Everyone] on lines 3 or 4 instead of a user name to allow everyone access to the contents of a private container, or [Operators] to allow ops access. If a Permissions plugin is available, you can use groups like [Moderator] or [Admins] or others as defined in the Permissions settings files.

    The owner of a container can add more users by placing additional signs beside the container with the heading [More Users], where lines 2-4 specify the names of the additional users. You can edit the users on previously placed signs by right clicking the sign, and using the command '/lockette <line number> <text>' to change it.


    Working with Doors:

    To protect a door, you can use the same method as protecting a container, the sign will attach to the door automatically. In addition, you can attach a [Private] wall sign to any side of the blocks just above or just below a door. For double doors only one side needs a sign. Door support is enabled by default in the config file.

    Once a door is protected it will only open for someone listed as a user, and will not respond to redstone power or switches unless [Everyone] is listed as a user. Iron doors which usually won't open from clicking will work just as wooden doors. In addition, double doors will open together automatically!

    You can also use [More Users] signs as with containers, with the caveat that the sign cannot be placed on the block above the door if the [Private] sign is not above the door as well! (This is done to prevent a security uncertainty issue.)

    Protected doors will be closed automatically if a timer is set. A timer can be set globally with a configuration option, or individually for each door by using the tag [Timer: #] on line 3 or 4 of the [Private] sign, where # is the number of seconds that the door should remain open. If the timer is set to 0, this means the door will never automatically close. If no timer is specified, protected doors will use a global timer set in the configuration file. If the server is shut down cleanly any open doors will be closed, but in the event of a server crash while a door is open, it may remain so. Note that the initial state of a door is assumed to be closed.

    Care must me taken to place protected doors on a stable block. Building a door on sand, gravel, leaves, TNT and et cetera are allowed by the plugin, but cannot be secured fully. :3 Additionally, it should be noted that most status messages still refer to locked blocks as containers, so for the purpose of simplicity, doors should be considered as a type of container.


    Features:
    • No passwords or databases needed!
    • Permission checks run in constant time, no matter how many protected containers.
      • One owner and up to 11 additional users supported. (17 for double chests!)
      • Allows access to [Everyone] while still protecting the container from vandalism.
      • Allows group names in conjunction with many other plugins.
    • Special powers for ops or admins, configurable with permissions.
      • Reports when an admin does something naughty.
    • Protects single and double chests, dispensers, and furnaces.
      • Explosion and block-break protection for the protected container and sign.
        • Option to protect all containers from explosions.
    • Full support for doors, both wooden and iron!
      • Double doors are handled automatically, with no redstone.
      • Doors can be set to close automatically, via a timer setting.
      • Redstone hacking is disabled for protected doors.
    • Prevents creation of chests larger than 2 blocks.
    • Informative or helpful messages when interacting with containers.
      • The first time a chest is placed, a help message will be shown.
      • Types of messages shown are configurable in settings.
      • Additional language support.

    Advanced Setup (Permissions) (open)

    Advanced Setup:
    There are a few things you can now customize in the configuration files for the plugin, found in the plugins/Lockette folder. After running the plugin for the first time, two files will be created, config.yml and strings.yml. The first holds the following settings:
    • enable-permissions - Allows the use of permission nodes to specify who can do what. If this is disabled, groups will still be used but admin status is taken from the ops file. Defaults to false.
    • enable-messages-* - Enables or disables groups of messages listed in the strings.yml file. Not counting the broadcast ones.
    • broadcast-*-target - Sets the group or player that specific broadcast messages should be sent to. This can be set to "" for no one.
    • explosion-protection-all - Enabling this extends explosion protection to all containers on the server, not just [Private] ones. Default is disabled.
    • allow-admin-bypass - Allows admins to go though any protected door. Default is true.
    • allow-admin-snoop - Allows admins to peek into chests owned by other people. Default is false, and this setting is recommended! A broadcast message will be sent each time an admin snoops in a protected container where the admin doesn't have permission to. The message will be sent to a player or group as specified in another option. Admins can still break protection on chests if this is disabled, however.
    • enable-protection-doors - Enables support for private doors, defaults to true.
    • default-door-timer - Sets the door closing timer for all protected doors on the server, unless overridden by a specific sign. Defaults to 0, which disables the door closing timer.
    In the strings.yml file, you can set alternate language tags for [Private] and such, in ANSI format. If you need characters not in ANSI then you might try UTF-8 format, though it seems bugged tight now. The default alternate tags are in French, but server ops are free to translate the whole file into the language of their choice. If you do this, please share it back to me~ :3 If you want to disable only a specific message, you can set it to "", the empty string. Admins can use the command '/lockette reload' after editing the configuration files, to reload them.

    If a Permissions plugin is not available or the enable-permissions option is set to false, Lockette will use the ops file to determine who are admins. Admins can break the protection on any chest, and look inside protected chests (only if the related option is set), as well as reload the plugins configuration files. All non-ops will be able to create protected containers for themselves.

    If a Permissions plugin is available and the enable-permissions option is set to true, the following nodes will be used instead of the ops file and are included by default in the '*' node:
    • lockette.user.create.* - Permission required to create a protected container or door. Possible sub-nodes include chest, dispenser, furnace, and door. (The permission lockette.create.all is still supported, but obsolete.)
    • lockette.admin.create.* - Allows admins to create containers and doors for other users. Possible sub-nodes include chest, dispenser, furnace, and door. Leave line 2 blank for the default behavior or enter the name of your choice. Capitalization matters.
    • lockette.admin.break - Allows breaking protection on containers.
    • lockette.admin.bypass - Allows opening of any locked door.
    • lockette.admin.snoop - Allows peeking in protected containers. (The setting allow-admin-snoop must be true.)
    • lockette.admin.reload - Allows use of the reload command.

    Technical Information (open)

    Technical Information:

    This plugin has been tested and shown to be working for many builds of CraftBucket though a number of the more recent builds had a serious issue, so I'm suggesting a minimum build of 561 now. If you update past what is listed in the post's title and the plugin seems to break, it is probably not my fault. Post a note anyway and I'll see about fixing. I'll try and keep up with the new recommended build system, but for latest builds that break things, you should expect some time to pass before I take care of the issue, as this plugin is now mature. :3

    If there are multiple containers by the placed sign, the plugin will use the NESW rule to choose the first container that is not yet private. To elaborate, the plugin will check to the north of the sign first, and if no container or door is available to the north, it will continue checking clockwise around the sign.

    Due to the current implementation of the explosion event, this plugin will cancel all explosions that would damage the container or sign, rather than just remove the container and sign from the blocks to be damaged. Canceled explosions still knock signs off the walls. Canceled explosions leave signs looking blank, but this is just a graphic glitch, reconnect to fix.

    Bonus: This plugin will prevent chests bigger than 2 blocks from being created via glitches. (Again, this could be circumvented using WorldEdit commands, so take care who has access to such a plugin.)

    This plugin was inspired by the old hmod plugins Lock by Roman "kingseta" Pramberger and ChestCapsule by Fernando "Fergo".

    Hooking into Lockette (open)

    Hooking into Lockette:

    If you are a plugin author and want to connect to Lockette, you can use a public static function to get information about the protected status of a block.

    More info later, perhaps, but if you need the details now then go poke through the source~

    Future Possibilities:

    There are a number of things that have been suggested, and they tend to be added to the list below if I think they might be a good idea. However, some sort of locked container limit is requested often but this is not possible without a database to track the number of locked containers someone has. All things considered, this will not be supported. On the up side, without a database you can have literally millions of locked containers without any sort of lag, and there are permissions to restrict who can create locked chests. Perhaps only allow Moderators to create locked chests for other users, if you don't want to allow infinite locked chests.

    Aside what has already been implemented, the following may or may not appear in future versions:
    • Furnace/dispenser clusters, protected by a single sign.
    • [Log] sign to list recent users of a container or door.
    • iConomy fee for protecting containers/doors.
    • Worldguard connection.
    • [Protected] tag for viewing only.
    • Specific time range that doors can be opened.
    • DataLog plugin support.
    • More types of protected blocks, such as brewing stands.
    If you want any of the above features sooner than never, let me know! However, I currently see Lockette as functionally complete, for the most part, in that it already has all the functionality it needs. Future updates will mostly be to account for changes in Minecraft and Bukkit.


    Final Note:

    Please leave a reply if there are any bugs or suggestions, and if you like this plugin you can click the like button at the bottom of this post~ Thanks to those few that have donated! [​IMG]
     
  2. Offline

    CompeteToDefeat

    With 1.7.6 the protections seem to work however I am now unable to create a double chest. I get "[Lockette] Illegal chest removed!". Nothing in the logs when I try to create the double chest, I just get that message in chat window.
     
  3. Fixed in 1.7.7
     
  4. Offline

    CompeteToDefeat

    Man you guys are fast.
     
  5. Offline

    Saiyan

    Just an idea but y'all should practice putting the version in the name like "Lockette-1.7.7.jar" or something like that on release. helps in case we have to revert back one version but we have already overwritten it.
     
  6. Offline

    CompeteToDefeat

    I love lockette. Really my only complaint is that lockettes just stay around forever. Would be nice if there was way to automagically remove lockettes of inactive players.
     
  7. Nice idea in theory. In practice it causes a LOT of support issues when people forget to remove old jars.
     
  8. Offline

    DerekZil

    Can you make a way so players do not have unlimited locks?
    Can you make it so I set the amount the group can lock?

    Help please. :D


    Sorry for the double post but this gets missed a lot and I tried to see if I can do this.
     
  9. That's not really within the scope of a no database locking plugin.
     
  10. Offline

    Agent766

    Code:
    2012-12-02 22:15:41 [INFO] This server is running CraftBukkit version git-Bukkit-1.4.5-R0.2-b2488jnks (MC: 1.4.5) (Implementing API version 1.4.5-R0.2)
    2012-12-02 22:15:43 [SEVERE] [Lockette] Detected craftbukkit build [2488], but requires requires build [2502] or greater!
    I'm running the latest beta. Is that still not the correct version?
     
  11. Offline

    LlmDl

    Use Lockette 1.7.4 with that version of bukkit. Anything past that is made for CB 2502 and up only.
     
  12. Offline

    Agent766

    I just used a dev build of CB. Are there any benefits for targeting a dev build compared to a beta? Were there specific features added/modified that it uses?
     
  13. Offline

    md_5

    Because a previous dev build broke LWC, and the fix is only compatible with dev builds past the breaking build.
     
  14. That release is for the latest CraftBukkit dev build.
     
  15. Offline

    Zephedge

    I apologize, I don't know what I was doing wrong here but it seems to work fine under Pex now.

    I believe there is an permission incompatibility issue with PermissionsEx. Lockette creation seems to work by default, even after having given the node -lockette.* and enabling permissions in the Lockette config file. At the same time, Lockette seems to obey permissions in bPerms.

    Edit: Also, it appears that PEx isn't even looking for the node in the debug info.
    More editing for version info:
    Lockette 1.7.7
    PermissionsEx v1.19.4
     
  16. Offline

    sweepyoface

    Attached Files:

  17. Offline

    CompeteToDefeat

    What bukkit version? What lockette version. You show us the output of /plugins but the output of /version and /version lockette would have been 1000x more useful.
     
  18. Offline

    sweepyoface

    http://imgur.com/V2Xv1 there u go
     
  19. Offline

    LlmDl

    Use lockette 1.7.4 until you update bukkit past 2512.
     
  20. Offline

    eamon12

    This plugin is awesome it helped my server a lot, I didn't want people to grief/raid other people's chests or grief buildings and Lockette helped protect the chests!
     
  21. Offline

    HeroCC

    Can I claim a chest so nobody breaks it, but anybody can open it?
     
  22. Offline

    LlmDl

    yes, do it like normal, on the third line put [everyone]
     
  23. Offline

    leenexer

    Do I need Java 7 to run lockette? I run my server on a mac and because my mac version is still 10.5, it cannot download java 7, is that why I cannot run lockette when loading up the server?
    (I use CB for 1.4.5-r.02 and downloaded lockette 1.7.7)

    this is the message i get:
    [​IMG]
     
  24. Offline

    LlmDl

    leenexer
     
  25. Offline

    leenexer

    what if i already updated past 2512 and the same problem occurs? should i just use bukkits below 2512 and use 1.7.4? i tried it and the samething happens.
     
  26. Offline

    sfmplayer

    Is it possible to remove lockette signs after an chest isnt used for like 20 days ?

    My server is full of protected items, but the players using them arent playing anymore....
     
  27. Offline

    generilisk

    I'm using it with Towny...I believe it's Towny that's allowing this, but it is happening on my server.
     
  28. Offline

    sfmplayer

    Btw just a quick questions
    If a player has his own land, and he isnt playing for a while does towny allow to remove that player form that claimed land automatic ?

    And i dont see towny doing that in there features ?
     
  29. Offline

    LlmDl

    Yes, towny will remove land from players who are inactive and/or cannot pay their taxes.

    When a town falls into ruin, or when a mayor uses a command, a plot's signs can be removed, including lockette signs.
     
  30. Offline

    sfmplayer

    Does it also recover the region to how it look liked before they bought it ?
     
  31. Offline

    generilisk

    It can...but that's more a discussion for the Towny thread than here.
     

Share This Page