Inactive [FUN/MISC] Vegetation 3.4.6 - Wild Grass/Vines/Plants/Moss/Grazing Animals (Permissions 2.6+) [1060]

Discussion in 'Inactive/Unsupported Plugins' started by zeff, Mar 9, 2011.

  1. Offline

    zeff

    Vegetation: Wild Grass, Vines, Plants and Moss Growth! v3.4.6

    This plugin implements the functionality of ejhopkins' Wild Grass Collection v15.2 server mod, as well as vines on trees, (partially working) lily pads and mini-cacti on land, mossy growth spreading on cobblestone and surface plant spreading functionality based on Master-Guy's PlantSpreader plugin. **Note that in order for the players to see the wild grass, you must install the client mod following the instructions found here.** Of course, the grass and/or plant growth can be disabled.

    Now supports vines! See the latest screenshots in the list below.


    Screenshots (I'm using Misa's HD Texture Pack):
    Show Spoiler

    [​IMG]
    Yeah, I didn't let much grass grow. I had it set too low for the demo screenshot.

    [​IMG]
    Holy cow, that's seriously planty.

    [​IMG]
    Single grow of a square of tall (10) grass blocks around me using the /gg 10 command on each block.

    [​IMG]

    This field was grown using /growfield 8.

    [​IMG]
    ...and then mowed back down with /mow.

    [​IMG]
    Nice pretty vines hanging down from this tree... (stock MC textures)


    Features/caveats:
    Show Spoiler

    • Placed plants (vines, cacti, lilypads) will sometimes (actually, semi-frequently) pop out and become plant pickups. This is an issue with the Minecraft server automatically doing its environmental plant-population algorithms. Until I find a way to circumvent this, your mileage may vary. Again, anyone is welcome to tweak the source code and make it work better.
    • To be able to plant flowers on sand or water requires a server patch.
      (see below)
    • Grass will grow taller. It can get pretty ridiculous. Without the optional client-side mod, players will only see normal grass blocks.
    • Specified animals will eat whatever grass they encounter, down by one level, on a timed basis.
    • Plants (flowers, mushrooms, cacti, canes, and pumpkins) will spread to nearby adjacent blocks of the same type.
    • Tall Grass and Dead Scrubs now also grow and spread
    • Growth will only occur during the daytime.
    • It will also only occur in the biomes set in the .ini file (see below)
    • It will also occur in all worlds hosted by a server, and only in chunks occupied by at least one player.
    • Configuration folder/file will be created if not found. To reset to factory defaults, simply delete the plugins/Vegetation/Settings.ini file.




    Server Patcher:
    Show Spoiler

    Bukkit Patcher (Download):
    If you want to be able to plant flowers on sand/water, you need to patch your craftbukkit version with the patcher provided here. However, putting flower blocks on water requires you to target the non-water block beneath the water block you want to plant your flower on. This is due to the way the client mod renders lilies, something I can not change. Bugs may occur if you don't plant them correctly, however there is no way your server map will get corrupted. In that case the client thinks there is a plant block on top of water while there actually is none. You will be able to see the "fake" lily but nobody else will, those fake ones will disappear once you relog.
    You may also use /grow flower to grow lily pads on water.

    This patch will not corrupt your map in any way. If you don't have it installed, the server will just unroot all flowers previously planted on sand/water blocks. They'll just pop.


    start_patcher.bat:
    @echo off
    java -Xincgc -Xmx1G -jar BukkitPatcher_0.0.jar craftbukkit.jar
    pause

    Open the start_patcher.bat file and edit the highlighted portion to the name of your carftbukkit file. You have to put both files into the same directory as your craftbukkit.jar in order to patch it.

    Commands:
    Show Spoiler

    • /grow [type]: trigger a manual growth loop for the specified plant type.
      Valid types are: flower, mushroom, cactus, sugar_cane, moss, scrub
    • /mow: removes all grass within growthRange of player (see configuration) - it will reduce all tall grass blocks into grass-covered dirt blocks.
    • /biome: returns the type of biome the player is currently standing on. You can use this command to collect information on which biome the new tall grass blocks are placed in. Please post your findings in here so I can implement it.
    • /purge [type]: purges your map and removes vines and wild grass
      Valid type are: wild_grass, vines, tall_grass
    (Working on adding back the other commands / features)​


    Configuration:
    Show Spoiler

    • The configuration file (plugins/Vegetation/<your worlds name>.ini) looks like this:
    Code:
    /* Block Search Settings:
    growthRange=20
    verticalRadius=5
    
    /* Vegetation Settings:
    enableGrass=false
    enableTallGrass=false
    
    /* Set max grass height from 1-9
    maxGrassHeight=9
    enablePlants=false
    enableFlowers=false
    enableFungi=false
    enablePumpkins=false
    enableCacti=false
    enableCanes=false
    enableMoss=false
    enableLilyPads=false
    enableVines=false
    
    /* If this option is set to true,
    /* moss will grow on any cobblestones touching water
    /* regardless if there was a moss block to spread from or not.
    waterGrowsMoss=false
    
    /* Player related Settings:
    maxActivePlayerCommands=40
    spreadAmountFlowers=5
    spreadAmountFungi=5
    spreadAmountCacti=5
    spreadAmountSugarCane=5
    spreadAmountMoss=5
    spreadAmountTallGrass=5
    /* The player will trample a path through the grass if set to true.
    trampleGrass=false
    
    /* ENTITIES:
    enableGrazers=false
    /* Sets max number of grazing animals.
    /* You should decrease this number if you encounter server lag.
    grazerMaxCount=10
    grazingSheep=true
    grazingCows=true
    grazingPigs=true
    grazingChickens=true
    
    /* BIOMES:
    /* Enabled/Disables the growth of vegetation on
    /* certain biomes.
    growForestBiome=true
    growRainforestBiome=true
    growShrublandBiome=true
    growSavannahBiome=true
    growPlainsBiome=true
    growSeasonalForestBiome=true
    growIceDesertBiome=true
    growDesertBiome=true
    growHellBiome=true
    growSwamplandBiome=true
    growTaigaBiome=true
    growTundraBiome=true
    
    /* EVENTS:
    /* The following parameters determine how many ticks of
    /* 100 ticks a specific type of action is being executed.
    /* (Example: If grassPercent is set to 60, there is the possibility
    /*  of grass growing at 60/100 ticks if a grass block is found 60 times.
    grassPercent=40
    tallGrassPercent=20
    plantsPercent=5
    mossPercent=5
    lilyPadPercent=5
    vinePercent=5
    grazePercent=10
    
    
    • growthRange: width radius (from each player), in blocks, of horizontal block-checking and growth to occur - this affects server performance.
    • verticalRadius: height radius (from each player), in blocks, of vertical block-checking and growth to occur - this also affects server performance.
    • enableGrass, enable tallGrass, enablePlants, enableMoss, enableGrazers: self-explanatory :)
    • enableFlowers, enableFungi, enableCacti, enablePumpkins, enableCanes, enableVines, enableLilyPads: individually enable/disable growth types as needed. If enablePlants is set to false, these options will be ignored.
    • waterGrowsMoss: if set to true, any cobblestone touching water will become mossy over time. If moss spreading is also enabled, it will continue to spread from there.
    • grassPercent: percent of the time in which grass should grow
      (see also grazePercent below)
    • plantsPercent: percent of the time in which plants should spread
    • mossPercent: percent of the time in which moss should spread
    • lilyPadPercent: percent of the time in which lilypads should spread
    • vinePercent: percent of the time in which vines should grow
    • tallGrassPercent: percent of the time in which tall grass should spread

    • growForestBiome, growRainforestBiome, growShrublandBiome, growSavannahBiome, growPlainsBiome, growSeasonalForestBiome, growIceDesertBiome, growDesertBiome, growSwamplandBiome, growTaigaBiome, and growTundraBiome: individually enable/disable growth in these biomes as needed.
    • enableGrazers: if set to true, then the mobs (if enabled with the following directives) will eat the grass down by one level.
    • grazePercent: percent of the time in which animals will eat the grass
    • grazingSheep, grazingCows, grazingPigs, grazingChickens: enable/disable the ability for these individual animal types to graze on the grass, accordingly.




    Permissions:
    Show Spoiler

    - 'vegetation.grow' - grants access to the /grow command​
    - 'vegetation.growall' - grants access to the /growall command​
    - 'vegetation.mow' - grants access to the /mow command​
    - 'vegetation.purge' - grants acces to the /purge command​
    - player command biome does not require any player permissions​

    Download:
    Download the Plugin (latest version, JAR) v3.4.6​



    Source is now at Github - most recent releases can be found under the test branch.​

    Previous builds can be found here (and on Github).​

    Changelog:



    Show Spoiler

    Version 3.4.6 09-August-2011
    * fixed Long Grass growing on sand and water upon chunk creation​

    Version 3.4.5 22-July-2011
    * fixed playerlist for nether and skylands​
    * fixed possible memory leak​
    * fixed a lot of NullPointerExceptions​

    Version 3.4.4 20-July-2011
    * vines will now vanish if a tree burns down​
    * tweaked tall grass spread a bit​
    * added option to purge command (wild_flowers will purge all sand flowers and lily pads)​

    Version 3.4.3 10-July-2011
    * fixed vines turning back into sugar cane blocks (hopefully)​
    * vines decay now​

    Version 3.4.2 22-June-2011
    * it should be possible to edit signs again​

    Version 3.4.1 16-June-2011
    * fixed Wild Grass​
    * adjusted spreading of Tall Grass​
    * added more options for purge command (self-explaining)​
    * new algorithm for trample grass!​
    * Wild Grass no longer grows on the same block as Tall Grass​

    Version 3.4 14-June-2011
    * added new purge command which removes vine blocks and resets grass blocks meta data (removes wild grass)​
    * vines will only grow on normal trees​
    * added Tall Grass aka Dead Scrubs, Tall Grass and Green Scrubs​
    * added settings check for the grow command, players now only can grow plants which are also enabled in the settings​
    * plants now only spread within their biome type​
    * enabled wild grass and trample grass again​

    Version 3.3 06-June-2011
    * implemented Operator commands for those who don't have Permissions installed on their server​
    * disabled grass for now, pending investigation​
    * fixed plant growth explosion​
    * added "biome" player command, which will just tell you in which type of biome you currently in​

    Version 3.2.2 20-May-2011 zeff
    * vines will no longer drop sugar canes​
    * player can now mow grass with hoes​
    * trampleGrass changed so that it appears more natural (kicks off with a chance of 40% now)​

    Version 3.2.1 14-May-2011 zeff
    * fixed a nasty bug where plants, especially lilies would sometimes replace a block instead of growing on one​
    * flowers and mushrooms now only grow if the light level is appropriate​
    * fixed a bug with planting flowers on water​
    * red roses no longer spread yellow flowers​

    Version 3.2 12-May-2011 zeff
    * separate setting files for each world
    * lily pads added​
    * sand flowers added​
    * performance improved​

    Version 3.1.2 06-May-2011 zeff
    * Implemented thread-safe playerlist as preparation for multi world support​
    * changed default settings for first plugin run​

    Version 3.1.1 02-May-2011 zeff
    * Cacti no longer spawn directly beside blocks which would unroot them instantly​
    * Sneaking players no longer trample down grass​
    * Minor bug fixes​

    Version 3.1 28-Apr-2011 zeff
    * Animals can once again graze grass​
    * Implemented spreading ratio for flowers/mushrooms/cacti. This will prevent them from covering your whole map as they can only spawn in a specific ratio per area​
    * Vines are growing now once you enable them​
    * "trampleGrass": If enabled, players will trample down grass and create a path​
    * "maxGrassHeight": self-explaining​

    Version 3.0 27-Apr-2011 zeff
    * disabled growall command since it's kind of useless the way it is now​
    * fixed mow player command​
    * disabled vines since they are not working properly and create lag​
    * added new setting option for player commands: maxActivePlayerCommands only allows a set amount of commands to run simultaneously​

    Version 2.31 13-Apr-2011 w5i2
    * Recompiled against latest recommended Craftbukkit build #674.​
    * Fixed another pretty ridiculous bug in the plant growth player-getting subroutine, one which was seriously affecting performance. Should work even more as it was designed to work now. :)

    Version 2.3 09-Apr-2011 w5i2
    * Recompiled against latest recommended Craftbukkit build #670.​
    * Grass grows through snow blocks now. Can't wait until 1.5 comes out!
    * Fixed a pretty ridiculous bug in the plant growth percentage calculations. Should work as it was designed to work now. :)

    Version 2.21 01-Apr-2011 w5i2
    * Recompiled against latest recommended Craftbukkit build #617.​
    * Added the ability to have water cause cobblestone to become mossy. Only if the cobblestone is touching the water, obviously.. And of course, normal moss spreading can take over from there if you have that enabled as well.​


    Version 2.2 30-Mar-2011 w5i2
    * Updated to incorporate new features of Wild Grass 10.1+ -- vines!!
    * Changed growth percentages to doubles, so now fractional percentages may be used in the .ini file.​
    * Added HELL biome to the list of configurable biomes (see above)​
    * added /growvines # command. For example, /growvines 10 will grow ten random vines within growthRange number of blocks.​
    * added /vine # command. If you aim at any lower leaf block on a tree and type /vine 3 it will grow a single vine from that block, three blocks tall.​
    * Recompiled against latest recommended Craftbukkit build #602.​

    Version 2.11 25-Mar-2011 w5i2
    * Fixed the /growgrass # command handling. Try /growgrass 1000 and watch it grow!​

    Version 2.1 24-Mar-2011 w5i2
    * Improved the plant spreading code, now my world has way too many flowers. :) Still not seeing any cacti growth, but I do see evidence of canes spreading.​
    * Grazing animals now will only eat grass that is >3 in height. I will most likely add a grazeHeight setting to the .ini file.​
    * Added /gg, /growfield and /grass commands (see Usage above)​
    * Added optional numeric arguments to the /overgrow and /growgrass commands to temporarily change/set the grassPerGrow value to something higher if needed.​
    * /overgrow now has one plant cycle included per 10 grass cycles (unless growPlants is disabled, of course)​
    * /mow now sets the surrounding grass level to 3 instead of 1 (completely flat). If you prefer the completely flat look, you can use /growfield 1 to achieve the same effect.​
    * Removed the obnoxious "Updating player position.." spam from the debug logging​

    Version 2.0 20-Mar-2011 w5i2
    * Major rewrite of the timer task code. This should greatly help with CPU performance issues.​
    * /overgrow now only grows around the player who typed it, rather than all players. It also now runs 1,000 growGrass() cycles, and notifies you at 25%, 50%, 75%, and completion, since it takes a while to run.​
    * Rewrote the way the timer handles the growth tasks - now it is based on a 100-slot timeslot system, so grass/plant/moss/graze amounts can be specified as percentages.​
    * Removed a few unneeded configuration directives and added some others.​

    Version 1.5 19-Mar-2011 w5i2
    * Had the idea to add animal grazing. This should help keep the grass down. :)

    Version 1.41 18-Mar-2011 w5i2
    * Recompiled against the latest recommended Craftbukkit build #556.​
    * Fixed the cacti/canes growth.​

    Version 1.4 18-Mar-2011 *it is recommended that you update to this version or newer* w5i2
    * Divided the moss, grass, plants, and block manipulation functions into separate Java classes.​
    * Added /growmoss command.​
    * Added mossEnabled and mossPerCycle to the .ini settings.​
    * Rewrote the TimerTask threads to be properly implemented (as classes instead of functions)​
    * Finally got the mossy cobblestone spreading to work​
    * I completely forgot to fix the cacti/canes growth, it will be fixed in the next release :)

    Version 1.31 15-Mar-2011 w5i2
    * Fixed a serious bug in which it would "grow" half-blocks into other types of half-blocks, or rotate stairs and rails. I apologise for any inconvenience this may have caused.​
    * Added the remaining biomes (sans Biome.HELL) to the configuration​
    * Apparently TimerTask asynchronicity is discouraged, so I changed the timer tasks to synchronous.​

    Version 1.3 14-Mar-2011 w5i2
    * Rewrote the looping routines again! They actually work properly now.​

    Version 1.21 10-Mar-2011 w5i2
    * Rewrote the looping routines to be a bit more efficient.​
    * Fixed a couple more mathematical bugs.​
    * Discovered and implemented the nifty Block.getRelative(BlockFace.UP) method.​

    Version 1.2 10-Mar-2011 w5i2
    * Added /overgrow command.​
    * Recompiled against latest recommended Craftbukkit build #531.​

    Version 1.1 10-Mar-2011 w5i2
    * Fixed flawed multi-world checking code. :)
    * Fixed flawed block-checking code.​
    * Added more configuration options.​
    * Added more biomes in which growth may occur.​

    Version 1.0 09-Mar-2011 w5i2
    * Created plugin.​
     
    Teteros, Sphax, kahlilnc and 2 others like this.
  2. Offline

    zeff

    Ya, that's what I meant^^
    That's odd but still a client side issue I can't do much about :( Do sugar cane blocks growing on trees drop anything for you?
     
  3. Offline

    Yoshinat0r

    Noticed a minor issue, not sure if it's easily fixable: If lava is placed on a grass block with tall grass growing on it, the tall grass will just stay there poking right up through the lava. I have a big lava moat that I created over grass blocks and I am noticing visible tall grass poking up out of the lava, not very pretty lol
     
  4. Offline

    Musaddict

    Can you (as soon as you can) make this compatible with Spout? By compatible I mean make it so that the wildgrass is hooked into Spout instead of a client-side mod.
     
  5. Offline

    fatmarley

    I second the spout conversion!
     
  6. Offline

    zeff

    No can do since I am not the one developing the client mod. I tried to contact the developer a few times but he didn't reply even once..

    Fixed in next version

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: May 11, 2016
  7. Offline

    Yoshinat0r

  8. Offline

    Musaddict

    Ok, well hopefully he'll catch on that Spout is the future of MC and try and start doing it himself i guess. Wildgrass is so popular, I would hate to see it disappear from servers.
     
  9. Offline

    Kiwii

    As far as I understood that is all client-side (except of the wood), so you should not need a server plugin for that. The only thing @zeff could merge would be setting the data values for the woodblocks to have the desired rotation. Would actually be cool, if wood did rotate itself to fit to other woodblocks, like rails do.

    I don't know if I'll use this (as I already use WildGrass and other mods that could interfere) but thanks for sharing; this really looks very cool! Will try when I'm back from vacation :D
     
  10. Offline

    Yoshinat0r

    Wow you're right, it's all client side. Can't believe I didn't think of that. It works perfectly :D And yea, the wood rotation would be very cool to have.
     
  11. Offline

    Drat333

    Since part of this plugin is client side, do you think you can have support for Spout and Spoutcraft in the future?
     
  12. Offline

    Jdbye

    Would it be possible for you to add Wild Tall Grass support? Notch's tall grass implementation sucks as is and having two kinds of tall grass also sucks (especially when they look exactly the same with some texture packs)
     
  13. Offline

    SkeletonGamer

    Can you update your fantastic plugin for RB #1060 ? =)
     
  14. Offline

    mdt7734

    Will these settings allow plants, flowers, fungi, pumpkins, cacti, canes, and moss to spread and be seen without the tall grass client side mod, while disabling the growth of tallgrass, vines, and lilypads which I don't want on my server?

    Code:
    /* Block Search Settings:
    growthRange=20
    verticalRadius=5
    
    /* Vegetation Settings:
    enableGrass=false
    enableTallGrass=false
    
    /* Set max grass height from 1-9
    maxGrassHeight=9
    enablePlants=true
    enableFlowers=true
    enableFungi=true
    enablePumpkins=true
    enableCacti=true
    enableCanes=true
    enableMoss=true
    enableLilyPads=false
    enableVines=false
    
    /* If this option is set to true,
    /* moss will grow on any cobblestones touching water
    /* regardless if there was a moss block to spread from or not.
    waterGrowsMoss=true
    
    /* Player related Settings:
    maxActivePlayerCommands=40
    spreadAmountFlowers=5
    spreadAmountFungi=5
    spreadAmountCacti=5
    spreadAmountSugarCane=5
    spreadAmountMoss=5
    spreadAmountTallGrass=5
    /* The player will trample a path through the grass if set to true.
    trampleGrass=true
    
    /* ENTITIES:
    enableGrazers=true
    /* Sets max number of grazing animals.
    /* You should decrease this number if you encounter server lag.
    grazerMaxCount=10
    grazingSheep=true
    grazingCows=true
    grazingPigs=true
    grazingChickens=true
    
    /* BIOMES:
    /* Enabled/Disables the growth of vegetation on
    /* certain biomes.
    growForestBiome=true
    growRainforestBiome=true
    growShrublandBiome=true
    growSavannahBiome=true
    growPlainsBiome=true
    growSeasonalForestBiome=true
    growIceDesertBiome=true
    growDesertBiome=true
    growHellBiome=true
    growSwamplandBiome=true
    growTaigaBiome=true
    growTundraBiome=true
    
    /* EVENTS:
    /* The following parameters determine how many ticks of
    /* 100 ticks a specific type of action is being executed.
    /* (Example: If grassPercent is set to 60, there is the possibility
    /*  of grass growing at 60/100 ticks if a grass block is found 60 times.
    grassPercent=40
    tallGrassPercent=20
    plantsPercent=5
    mossPercent=5
    lilyPadPercent=5
    vinePercent=5
    grazePercent=10
     
  15. Offline

    zeff

    Yes, but tall grass is not a client mod. It's the grass implemented by notch with the last patch.
     
  16. Offline

    mdt7734

    Per the author.... **Note that in order for the players to see the wild grass, you must install the client mod following the instructions found here.**

    Tall grass has needed ejhopkins client side files, as implemented by thisnauthor.

    Now if the author wouldn't mind checking my config i would appreciaye it. Moss does not seem to spread beyond the cobblestone bordering water.
     
  17. Offline

    zeff

    tall grass =/= wild grass. You get them mixed up. Wild grass requires ejhopkins mod to be visible for the user, tall grass does not as it is an official block type implemented by notch.
    Your config seems okay to me and yes, moss does only spread if cobblestone is touched by water. It's a feature, not a bug.
     
  18. Offline

    mdt7734

    Thx.

    D'oh cane was growing from trees (vines w/client mod) even though the settings are off.

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: May 11, 2016
  19. Offline

    zeff

    That's odd. I have the exact same settings on one of my maps and no vines are growing at all. Did you try and use "/purge vines" and see if they regrow? Are you alone on your server?
     
  20. Offline

    mdt7734

    Have a couple folks. I can't recall the defaults, but I fired up the server to generate the config then shut it down, modified it, and went back online. I didn't think the 'vines' would grow without any chunks loading. Perhaps one of my other mods loaded a chunk or two when that happened.

    I'll test some tonight and do the purges like you mentioned, assuming nixing the mod in the meantime doesn't screw up the purging.
     
  21. Offline

    mdt7734

    This is just odd... i still have the same config above yet i was able to purge 53 vines, which makes me thinks it an anomaly since there were so few, but 25000 wild_grass were purged. How could it have grown with it being false the entire time?

    Changed my config to below with enablePlants=false to see if it still grows stuff.

    Show Spoiler

    Code:
    /* Block Search Settings:
    growthRange=20
    verticalRadius=5
    
    /* Vegetation Settings:
    enableGrass=false
    enableTallGrass=false
    
    /* Set max grass height from 1-9
    maxGrassHeight=9
    enablePlants=false
    enableFlowers=true
    enableFungi=true
    enablePumpkins=true
    enableCacti=false
    enableCanes=false
    enableMoss=true
    enableLilyPads=false
    enableVines=false
    
    /* If this option is set to true,
    /* moss will grow on any cobblestones touching water
    /* regardless if there was a moss block to spread from or not.
    waterGrowsMoss=false
    
    /* Player related Settings:
    maxActivePlayerCommands=40
    spreadAmountFlowers=5
    spreadAmountFungi=5
    spreadAmountCacti=5
    spreadAmountSugarCane=5
    spreadAmountMoss=5
    spreadAmountTallGrass=5
    /* The player will trample a path through the grass if set to true.
    trampleGrass=false
    
    /* ENTITIES:
    enableGrazers=false
    /* Sets max number of grazing animals.
    /* You should decrease this number if you encounter server lag.
    grazerMaxCount=10
    grazingSheep=true
    grazingCows=true
    grazingPigs=true
    grazingChickens=true
    
    /* BIOMES:
    /* Enabled/Disables the growth of vegetation on
    /* certain biomes.
    growForestBiome=true
    growRainforestBiome=true
    growShrublandBiome=true
    growSavannahBiome=true
    growPlainsBiome=true
    growSeasonalForestBiome=true
    growIceDesertBiome=true
    growDesertBiome=true
    growHellBiome=true
    growSwamplandBiome=true
    growTaigaBiome=true
    growTundraBiome=true
    
    /* EVENTS:
    /* The following parameters determine how many ticks of
    /* 100 ticks a specific type of action is being executed.
    /* (Example: If grassPercent is set to 60, there is the possibility
    /*  of grass growing at 60/100 ticks if a grass block is found 60 times.
    grassPercent=40
    tallGrassPercent=20
    plantsPercent=5
    mossPercent=5
    lilyPadPercent=5
    vinePercent=5
    grazePercent=10
    
     
  22. Offline

    Clucky

    LOL, Pumpkins spread so fast! Luckily I changed that :p
     
  23. Offline

    Raptor2213

    Ever thought about making this work with Spout so that you don't have to mod the client too?
     
  24. Offline

    sintri

    ej seems to have disappeared.
     
  25. Offline

    Ovocean

    He's back and plans to update soon ! :)
     
    sintri likes this.
  26. Offline

    sintri

    Thanks for the notification, bit terrible timing just moved to spout, which isn't really worth all the hype, though least they did fix too many chests causing lag. Ej's seems pretty cordial apologizing about disappearing unlike some other people, at any rate world just bit too plain without wild grass. Thanks again.
     
  27. Offline

    drakcore

    Vegetation doesn't work with spout?
    I just integrated spout into my server also just recently but want to add vegetation again. :<

    *Update

    Perhaps ask Ejhopkins the creator of Wild Grass on the his forum page if you could use his mod with spout making your server side adapation to automatically install the needed files on the clients that have spout.
    Or at least push the idea to him and people on the forums to get the ball rolling.
     
    Klotzonator likes this.
  28. Offline

    Klotzonator

    I'd second that :). Vegi+Spout would be awesome (I just kicked out ModLoader/MyCraft for AmbientSeasons and a lotta Spout related stuff and miss a little bit of the "old" Vegi stuff ;) ).

    I'm also looking forward to seeing what changes will be made to this mod in the brink of 1.9, as there are lilypads and stuff already included.
     
  29. Offline

    zeff

    I tried to contact him twice but never got a response. Seems like he either doesn't approve of me supporting his mod or just ignores messages.
     
  30. Offline

    drakcore

    Is vegetation going to be updated?
    Really just want to get the existing in game grass spread ATM but it looks like it doesn't work.
     
  31. Offline

    dabiggman

    Is this dead?
     

Share This Page