Inactive [FUN/MISC] Vegetation 3.4.6 - Wild Grass/Vines/Plants/Moss/Grazing Animals (Permissions 2.6+) [1060]

Vegetation: Wild Grass, Vines, Plants and Moss Growth! v3.4.6

This plugin implements the functionality of ejhopkins' Wild Grass Collection v15.2 server mod, as well as vines on trees, (partially working) lily pads and mini-cacti on land, mossy growth spreading on cobblestone and surface plant spreading functionality based on Master-Guy's PlantSpreader plugin. **Note that in order for the players to see the wild grass, you must install the client mod following the instructions found here.** Of course, the grass and/or plant growth can be disabled.

Now supports vines! See the latest screenshots in the list below.


Screenshots (I'm using Misa's HD Texture Pack):

Show Spoiler Hide Spoiler

Yeah, I didn't let much grass grow. I had it set too low for the demo screenshot.


Holy cow, that's seriously planty.


Single grow of a square of tall (10) grass blocks around me using the /gg 10 command on each block.



This field was grown using /growfield 8.


...and then mowed back down with /mow.


Nice pretty vines hanging down from this tree... (stock MC textures)

Features/caveats:

Show Spoiler Hide Spoiler

• Placed plants (vines, cacti, lilypads) will sometimes (actually, semi-frequently) pop out and become plant pickups. This is an issue with the Minecraft server automatically doing its environmental plant-population algorithms. Until I find a way to circumvent this, your mileage may vary. Again, anyone is welcome to tweak the source code and make it work better.
• To be able to plant flowers on sand or water requires a server patch.
  (see below)
• Grass will grow taller. It can get pretty ridiculous. Without the optional client-side mod, players will only see normal grass blocks.
• Specified animals will eat whatever grass they encounter, down by one level, on a timed basis.
  
• Plants (flowers, mushrooms, cacti, canes, and pumpkins) will spread to nearby adjacent blocks of the same type.
• Tall Grass and Dead Scrubs now also grow and spread
• Growth will only occur during the daytime.
• It will also only occur in the biomes set in the .ini file (see below)
• It will also occur in all worlds hosted by a server, and only in chunks occupied by at least one player.
• Configuration folder/file will be created if not found. To reset to factory defaults, simply delete the plugins/Vegetation/Settings.ini file.

Server Patcher:

Show Spoiler Hide Spoiler

Bukkit Patcher (Download):
If you want to be able to plant flowers on sand/water, you need to patch your craftbukkit version with the patcher provided here. However, putting flower blocks on water requires you to target the non-water block beneath the water block you want to plant your flower on. This is due to the way the client mod renders lilies, something I can not change. Bugs may occur if you don't plant them correctly, however there is no way your server map will get corrupted. In that case the client thinks there is a plant block on top of water while there actually is none. You will be able to see the "fake" lily but nobody else will, those fake ones will disappear once you relog.
You may also use /grow flower to grow lily pads on water.

This patch will not corrupt your map in any way. If you don't have it installed, the server will just unroot all flowers previously planted on sand/water blocks. They'll just pop.


start_patcher.bat:

@echo off​

java -Xincgc -Xmx1G -jar BukkitPatcher_0.0.jar craftbukkit.jar​

pause​

Open the start_patcher.bat file and edit the highlighted portion to the name of your carftbukkit file. You have to put both files into the same directory as your craftbukkit.jar in order to patch it.

Commands:

Show Spoiler Hide Spoiler

• /grow [type]: trigger a manual growth loop for the specified plant type.
  Valid types are: flower, mushroom, cactus, sugar_cane, moss, scrub
  
• /mow: removes all grass within growthRange of player (see configuration) - it will reduce all tall grass blocks into grass-covered dirt blocks.
• /biome: returns the type of biome the player is currently standing on. You can use this command to collect information on which biome the new tall grass blocks are placed in. Please post your findings in here so I can implement it.
• /purge [type]: purges your map and removes vines and wild grass
  Valid type are: wild_grass, vines, tall_grass

(Working on adding back the other commands / features)​

Configuration:

Show Spoiler Hide Spoiler

• The configuration file (plugins/Vegetation/<your worlds name>.ini) looks like this:

Code:

/* Block Search Settings:
growthRange=20
verticalRadius=5

/* Vegetation Settings:
enableGrass=false
enableTallGrass=false

/* Set max grass height from 1-9
maxGrassHeight=9
enablePlants=false
enableFlowers=false
enableFungi=false
enablePumpkins=false
enableCacti=false
enableCanes=false
enableMoss=false
enableLilyPads=false
enableVines=false

/* If this option is set to true,
/* moss will grow on any cobblestones touching water
/* regardless if there was a moss block to spread from or not.
waterGrowsMoss=false

/* Player related Settings:
maxActivePlayerCommands=40
spreadAmountFlowers=5
spreadAmountFungi=5
spreadAmountCacti=5
spreadAmountSugarCane=5
spreadAmountMoss=5
spreadAmountTallGrass=5
/* The player will trample a path through the grass if set to true.
trampleGrass=false

/* ENTITIES:
enableGrazers=false
/* Sets max number of grazing animals.
/* You should decrease this number if you encounter server lag.
grazerMaxCount=10
grazingSheep=true
grazingCows=true
grazingPigs=true
grazingChickens=true

/* BIOMES:
/* Enabled/Disables the growth of vegetation on
/* certain biomes.
growForestBiome=true
growRainforestBiome=true
growShrublandBiome=true
growSavannahBiome=true
growPlainsBiome=true
growSeasonalForestBiome=true
growIceDesertBiome=true
growDesertBiome=true
growHellBiome=true
growSwamplandBiome=true
growTaigaBiome=true
growTundraBiome=true

/* EVENTS:
/* The following parameters determine how many ticks of
/* 100 ticks a specific type of action is being executed.
/* (Example: If grassPercent is set to 60, there is the possibility
/*  of grass growing at 60/100 ticks if a grass block is found 60 times.
grassPercent=40
tallGrassPercent=20
plantsPercent=5
mossPercent=5
lilyPadPercent=5
vinePercent=5
grazePercent=10

• growthRange: width radius (from each player), in blocks, of horizontal block-checking and growth to occur - this affects server performance.
• verticalRadius: height radius (from each player), in blocks, of vertical block-checking and growth to occur - this also affects server performance.
  
• enableGrass, enable tallGrass, enablePlants, enableMoss, enableGrazers: self-explanatory
• enableFlowers, enableFungi, enableCacti, enablePumpkins, enableCanes, enableVines, enableLilyPads: individually enable/disable growth types as needed. If enablePlants is set to false, these options will be ignored.
  
• waterGrowsMoss: if set to true, any cobblestone touching water will become mossy over time. If moss spreading is also enabled, it will continue to spread from there.
  
• grassPercent: percent of the time in which grass should grow
  (see also grazePercent below)
• plantsPercent: percent of the time in which plants should spread
• mossPercent: percent of the time in which moss should spread
• lilyPadPercent: percent of the time in which lilypads should spread
• vinePercent: percent of the time in which vines should grow
• tallGrassPercent: percent of the time in which tall grass should spread
  
  
• growForestBiome, growRainforestBiome, growShrublandBiome, growSavannahBiome, growPlainsBiome, growSeasonalForestBiome, growIceDesertBiome, growDesertBiome, growSwamplandBiome, growTaigaBiome, and growTundraBiome: individually enable/disable growth in these biomes as needed.
  
• enableGrazers: if set to true, then the mobs (if enabled with the following directives) will eat the grass down by one level.
• grazePercent: percent of the time in which animals will eat the grass
• grazingSheep, grazingCows, grazingPigs, grazingChickens: enable/disable the ability for these individual animal types to graze on the grass, accordingly.

Permissions:

Show Spoiler Hide Spoiler

- 'vegetation.grow' - grants access to the /grow command​

- 'vegetation.growall' - grants access to the /growall command​

- 'vegetation.mow' - grants access to the /mow command​

- 'vegetation.purge' - grants acces to the /purge command​

- player command biome does not require any player permissions​

Download:

Download the Plugin (latest version, JAR) v3.4.6​

​

Download ejhopkins' WildGrass Collection (Forum)​

Download ejhopkins' WildGrass Collection (Mirror)​

​

Source is now at Github - most recent releases can be found under the test branch.​

Previous builds can be found here (and on Github).​

​

Changelog:

Show Spoiler Hide Spoiler

Version 3.4.6 09-August-2011​

* fixed Long Grass growing on sand and water upon chunk creation​

Version 3.4.5 22-July-2011​

* fixed playerlist for nether and skylands​

* fixed possible memory leak​

* fixed a lot of NullPointerExceptions​

Version 3.4.4 20-July-2011​

* vines will now vanish if a tree burns down​

* tweaked tall grass spread a bit​

* added option to purge command (wild_flowers will purge all sand flowers and lily pads)​

Version 3.4.3 10-July-2011​

* fixed vines turning back into sugar cane blocks (hopefully)​

* vines decay now​

Version 3.4.2 22-June-2011​

* it should be possible to edit signs again​

Version 3.4.1 16-June-2011​

* fixed Wild Grass​

* adjusted spreading of Tall Grass​

* added more options for purge command (self-explaining)​

* new algorithm for trample grass!​

* Wild Grass no longer grows on the same block as Tall Grass​

​

Version 3.4 14-June-2011​

* added new purge command which removes vine blocks and resets grass blocks meta data (removes wild grass)​

* vines will only grow on normal trees​

* added Tall Grass aka Dead Scrubs, Tall Grass and Green Scrubs​

* added settings check for the grow command, players now only can grow plants which are also enabled in the settings​

* plants now only spread within their biome type​

* enabled wild grass and trample grass again​

​

Version 3.3 06-June-2011​

* implemented Operator commands for those who don't have Permissions installed on their server​

* disabled grass for now, pending investigation​

* fixed plant growth explosion​

* added "biome" player command, which will just tell you in which type of biome you currently in​

​

Version 3.2.2 20-May-2011 zeff​

* vines will no longer drop sugar canes​

* player can now mow grass with hoes​

* trampleGrass changed so that it appears more natural (kicks off with a chance of 40% now)​

​

Version 3.2.1 14-May-2011 zeff​

* fixed a nasty bug where plants, especially lilies would sometimes replace a block instead of growing on one​

* flowers and mushrooms now only grow if the light level is appropriate​

* fixed a bug with planting flowers on water​

* red roses no longer spread yellow flowers​

​

Version 3.2 12-May-2011 zeff​

* separate setting files for each world​

* lily pads added​

* sand flowers added​

* performance improved​

​

Version 3.1.2 06-May-2011 zeff​

* Implemented thread-safe playerlist as preparation for multi world support​

* changed default settings for first plugin run​

Version 3.1.1 02-May-2011 zeff​

* Cacti no longer spawn directly beside blocks which would unroot them instantly​

* Sneaking players no longer trample down grass​

* Minor bug fixes​

Version 3.1 28-Apr-2011 zeff​

* Animals can once again graze grass​

* Implemented spreading ratio for flowers/mushrooms/cacti. This will prevent them from covering your whole map as they can only spawn in a specific ratio per area​

* Vines are growing now once you enable them​

* "trampleGrass": If enabled, players will trample down grass and create a path​

* "maxGrassHeight": self-explaining​

​

Version 3.0 27-Apr-2011 zeff​

* disabled growall command since it's kind of useless the way it is now​

* fixed mow player command​

* disabled vines since they are not working properly and create lag​

* added new setting option for player commands: maxActivePlayerCommands only allows a set amount of commands to run simultaneously​

​

Version 2.31 13-Apr-2011 w5i2​

* Recompiled against latest recommended Craftbukkit build #674.​

* Fixed another pretty ridiculous bug in the plant growth player-getting subroutine, one which was seriously affecting performance. Should work even more as it was designed to work now. ​

​

Version 2.3 09-Apr-2011 w5i2​

* Recompiled against latest recommended Craftbukkit build #670.​

* Grass grows through snow blocks now. Can't wait until 1.5 comes out!​

* Fixed a pretty ridiculous bug in the plant growth percentage calculations. Should work as it was designed to work now. ​

​

Version 2.21 01-Apr-2011 w5i2​

* Recompiled against latest recommended Craftbukkit build #617.​

* Added the ability to have water cause cobblestone to become mossy. Only if the cobblestone is touching the water, obviously.. And of course, normal moss spreading can take over from there if you have that enabled as well.​

​

Version 2.2 30-Mar-2011 w5i2​

* Updated to incorporate new features of Wild Grass 10.1+ -- vines!!​

* Changed growth percentages to doubles, so now fractional percentages may be used in the .ini file.​

* Added HELL biome to the list of configurable biomes (see above)​

* added /growvines # command. For example, /growvines 10 will grow ten random vines within growthRange number of blocks.​

* added /vine # command. If you aim at any lower leaf block on a tree and type /vine 3 it will grow a single vine from that block, three blocks tall.​

* Recompiled against latest recommended Craftbukkit build #602.​

Version 2.11 25-Mar-2011 w5i2​

* Fixed the /growgrass # command handling. Try /growgrass 1000 and watch it grow!​

Version 2.1 24-Mar-2011 w5i2​

* Improved the plant spreading code, now my world has way too many flowers. Still not seeing any cacti growth, but I do see evidence of canes spreading.​

* Grazing animals now will only eat grass that is >3 in height. I will most likely add a grazeHeight setting to the .ini file.​

* Added /gg, /growfield and /grass commands (see Usage above)​

* Added optional numeric arguments to the /overgrow and /growgrass commands to temporarily change/set the grassPerGrow value to something higher if needed.​

* /overgrow now has one plant cycle included per 10 grass cycles (unless growPlants is disabled, of course)​

* /mow now sets the surrounding grass level to 3 instead of 1 (completely flat). If you prefer the completely flat look, you can use /growfield 1 to achieve the same effect.​

* Removed the obnoxious "Updating player position.." spam from the debug logging​

​

Version 2.0 20-Mar-2011 w5i2​

* Major rewrite of the timer task code. This should greatly help with CPU performance issues.​

* /overgrow now only grows around the player who typed it, rather than all players. It also now runs 1,000 growGrass() cycles, and notifies you at 25%, 50%, 75%, and completion, since it takes a while to run.​

* Rewrote the way the timer handles the growth tasks - now it is based on a 100-slot timeslot system, so grass/plant/moss/graze amounts can be specified as percentages.​

* Removed a few unneeded configuration directives and added some others.​

​

Version 1.5 19-Mar-2011 w5i2​

* Had the idea to add animal grazing. This should help keep the grass down. ​

​

Version 1.41 18-Mar-2011 w5i2​

* Recompiled against the latest recommended Craftbukkit build #556.​

* Fixed the cacti/canes growth.​

Version 1.4 18-Mar-2011 *it is recommended that you update to this version or newer* w5i2​

* Divided the moss, grass, plants, and block manipulation functions into separate Java classes.​

* Added /growmoss command.​

* Added mossEnabled and mossPerCycle to the .ini settings.​

* Rewrote the TimerTask threads to be properly implemented (as classes instead of functions)​

* Finally got the mossy cobblestone spreading to work​

* I completely forgot to fix the cacti/canes growth, it will be fixed in the next release ​

​

Version 1.31 15-Mar-2011 w5i2​

* Fixed a serious bug in which it would "grow" half-blocks into other types of half-blocks, or rotate stairs and rails. I apologise for any inconvenience this may have caused.​

* Added the remaining biomes (sans Biome.HELL) to the configuration​

* Apparently TimerTask asynchronicity is discouraged, so I changed the timer tasks to synchronous.​

​

Version 1.3 14-Mar-2011 w5i2​

* Rewrote the looping routines again! They actually work properly now.​

Version 1.21 10-Mar-2011 w5i2​

* Rewrote the looping routines to be a bit more efficient.​

* Fixed a couple more mathematical bugs.​

* Discovered and implemented the nifty Block.getRelative(BlockFace.UP) method.​

Version 1.2 10-Mar-2011 w5i2​

* Added /overgrow command.​

* Recompiled against latest recommended Craftbukkit build #531.​

Version 1.1 10-Mar-2011 w5i2​

* Fixed flawed multi-world checking code. ​

* Fixed flawed block-checking code.​

* Added more configuration options.​

* Added more biomes in which growth may occur.​

​

Version 1.0 09-Mar-2011 w5i2​

* Created plugin.​

 

Some people and me suggested that before and @zeff said, he will do this as it does not seem do be difficult to add this feature.

Btw, a friend of mine asked, if it would be possible to make grass burn down when under fire and I think that would just be realistic. So would it be possible to "burn down" grass and make the block on fire turn into a dirt block?

 

Hem... I don't know what's wrong with my server, but after two weeks of running around, find wild vines, cacti, and flowers of different biomes I still haven't seen a lily pad. Everything else works correctly, though. Any help on that? or could it be caused by the client add-on not displaying them?
Oh, and running the latest versions of vegi (3.1.1) and craftbukkit( 766)

 

I guess you have patched the bukkit jar file as well yes?

 

You need to get v3.2.1 from my last release post and my patcher from the release post before that one. Sorry for the inconvenience but weasel5i2 wasn't around to update the OP yet.

 

So, this is my first attempt at playing with this plugin, and my friend and I have seem to have run into a little problem. Not sure what it could be, but grass only grows for one of us...whoever joins the server first. We both can *see* each others grass, but only the person that joined the server first seems to influence its growth. If I go to another area of the map, and he was on first, it doesn't grow for me, and it does for him (or vice versa).

Just wondering if I am missing something...

Thanks

 

That was one of the major bugs in the previous version. It should be fixed with 3.2.1. very sorry but I couldn't test the feature properly until a few days ago when I had 5 people on my server^^
The problem in short is that the timer fails to cycle the player list and thus only takes the first player from the list, which was the first to ever log in.

 

I've got 3.1.2 running..most recent (was your 3.2.1 a typo?)

 

Could you add a feature like Wild Caves?
http://www.minecraftforum.net/viewtopic.php?t=286605

 

I updated the version 2 times throughout the day I released the file so maybe you got an old file. Try loading a fresh download and if it's still not working....then I guess my fix didn't work cause the problem you are describing is exactly what I was trying to fix.

Edit: I know that this was probably not the best way to update but I was so annoyed with that bug and I just didn't wanna release a new version just for that sucker bug! Lists can seriously annoy me to death...

 

Could you make an option to make vines not breakable at all? So they only disappear when the leaves above are destroyed. I'm a bit tired of accidentally destroying vines all the time

And I do not want to sound impatient but could you give some information on the progress of stopping drops and the hoe thing?

 

Should be a option to stop vine growth form birch/redwood... doesn't realy fit

 

Still no luck. I downloaded both the zip and jar again, tried each...same issue.

 

Ah, now I understand the problem! You're using the download linked in the original post. Those files aren't updated yet. I have access to the ftp server but I didn't want to update them since you have to additionally patch your bukkit version to get lily pads and sand flowers working!
Get the patcher from this post: Patcher
The latest version is linked here: Vegetation v3.2.1
weasel5i2 was only yesterday but he still didn't get around to update the descriptions in the OP.

 

I'll give it a shot later tonight (I hope...my server is being migrated today). Any chance we'll see a version where we don't have to patch bukkit? That seems potentially problematic.

 

Problematic related to which case exactly?

 

To getting lilypads and sand flowers working. For example, I use a hosting company for my server where I don't think I can patch bukkit....never had to for any other plugin. I'd think that's the point of a plugin. You have a base system (bukkit) and then "plug in" code on top of it using the provided hooks to do what you are aiming for without touching the "base"

 

I see your point. I know that the bukkit api provides a "canBuildBlock" event. Funny thing is I only found out about that event the day after I released my patcher. I don't like the idea of changing bukkit either but at the time it was the only thing I could think of. I'll see what I can do.

 

No worries, if I can at least get grass working for everyone on the server, I'll be a happy camper. I thank you for your efforts!

 

BlockCanBuildEvent: This event is so useless, I can build flowers blocks on water and sand but what is it worth when they just pop out right after that...

 

The patcher is an ugly solution but it works well, so don't spend to long figuring out a cleaner solution. Add that hoe thingie instead

 

I made a feature request here. Hopefully it gets implemented someday.
I will work on the hoe thing and improve trampleGrass now.

 

Thanks in advance!
(please do not forget to make the drops of vines configurable/off-turn-able)

 

@zeff...We have success! We now have grass growing for all of us. Excellent work.


Definitely hope you can get the lilypads working at some point without the patch...


Thanks again

 

New Version: v3.2.2 [766]
Download - GitHub
WildGrass Mod v.13 (client portion only)

Player commands require Permissions 2,6+

Changelog

Bukkit Patcher (Download):
If you want to be able to plant flowers on sand/water, you need to patch your craftbukkit version with the patcher provided here. However, putting flower blocks on water requires you to target the non-water block beneath the water block you want to plant your flower on. This is due to the way the client mod renders lilies, something I can not change. Bugs may occur if you don't plant them correctly, however there is no way your server map will get corrupted. In that case the client thinks there is a plant block on top of water while there actually is none. You will be able to see the "fake" lily but nobody else will, those fake ones will disappear once you relog.
You may also use /grow flower to grow lily pads on water.

This patch will not corrupt your map in any way. If you don't have it installed, the server will just unroot all flowers previously planted on sand/water blocks. They'll just pop.

start_patcher.bat

Show Spoiler Hide Spoiler

@echo off
java -Xincgc -Xmx1G -jar BukkitPatcher_0.0.jar craftbukkit.jar
pause

Open the start_patcher.bat file and edit the highlighted portion to the name of your carftbukkit file. You have to put both files into the same directory as your craftbukkit.jar in order to patch it.

 

Just tested the new version and it seems to work like a charm <3
Thank you and keep on the great work on this plugin!

 

For those of us not using permissions, any chance of having the commands available - op only ?
and a quick question, I assume the growth of flowers, etc. still occurs if there's no permissions ? only so far, nothing seems to be happening.

 

Only the commands are locked without permissions, everything else is automated and functions fine without permissions.
Check your settings file.

I use

Code:

/* Block Search Settings:
growthRange=50
verticalRadius=10

/* Vegetation Settings:
enableGrass=true

/* Set max grass height from 1-9
maxGrassHeight=9
enablePlants=true
enableFlowers=true
enableFungi=true
enablePumpkins=true
enableCacti=true
enableCanes=true
enableMoss=true
enableVines=true

/* If this option is set to true,
/* moss will grow on any cobblestones touching water
/* regardless if there was a moss block to spread from or not.
waterGrowsMoss=true

/* Player related Settings:
maxActivePlayerCommands=40
spreadAmountFlowers=5
spreadAmountFungi=5
spreadAmountCacti=5
spreadAmountSugarCane=5
spreadAmountMoss=5
/* The player will trample a path through the grass if set to true.
trampleGrass=true

/* ENTITIES:
enableGrazers=true
/* Sets max number of grazing animals.
/* You should decrease this number if you encounter server lag.
grazerMaxCount=10
grazingSheep=true
grazingCows=true
grazingPigs=true
grazingChickens=true

/* BIOMES:
/* Enabled/Disables the growth of vegetation on
/* certain biomes.
growForestBiome=true
growRainforestBiome=true
growShrublandBiome=true
growSavannahBiome=true
growPlainsBiome=true
growSeasonalForestBiome=true
growIceDesertBiome=true
growDesertBiome=true
growHellBiome=true
growSwamplandBiome=true
growTaigaBiome=true
growTundraBiome=true

/* EVENTS:
/* The following parameters determine how many ticks of
/* 100 ticks a specific type of action is being executed.
/* (Example: If grassPercent is set to 60, there is the possibility
/*  of grass growing at 60/100 ticks if a grass block is found 60 times.
grassPercent=40
plantsPercent=5
mossPercent=5
vinePercent=5
grazePercent=10
enableLilyPads=true
lilyPadPercent=5

And having an OP only option would be fantastic!

 

Additionally, flowers only SPREAD from existing flowers. Just wanted to point that out

I know, I know, I am an lazy ass....will do that asap.

 

Does anyone else here watch notches twitter?
It looks like he's adding his own wildgrass to vanilla http://i.imgur.com/JUEYD.jpg

 

@Onza40
well, but it is not as awesome as wildgrass is

@zeff I
Occasionally we encounter insanely rapid flower and mushroom spreading on our server. This happened a few times when three or more people are in the same place. In less than a second an 8x8 square is filled with flowers and sometimes the half of them are dropped.
Sadly I could not figure out how to reproduce this bug intentionally but it happens often enough to get on my co-admin's nerves and it filles my users inventories with cheated flowers :/

Additionally, moss seems to only spread from water to cobble; not from cobble to cobble...

Our server is running Bukkit 798 and Vegetation 3.2.2.
From our <worldname>.ini:

Code:

/* Block Search Settings:
growthRange=20
verticalRadius=5

/* Vegetation Settings:
enableGrass=true

/* Set max grass height from 1-9
maxGrassHeight=9
enablePlants=true
enableFlowers=true
enableFungi=true
enablePumpkins=true
enableCacti=true
enableCanes=true
enableMoss=true
enableLilyPads=true
enableVines=true

/* If this option is set to true,
/* moss will grow on any cobblestones touching water
/* regardless if there was a moss block to spread from or not.
waterGrowsMoss=true

/* Player related Settings:
maxActivePlayerCommands=40
spreadAmountFlowers=5
spreadAmountFungi=5
spreadAmountCacti=5
spreadAmountSugarCane=5
spreadAmountMoss=5
/* The player will trample a path through the grass if set to true.
trampleGrass=false

/* ENTITIES:
enableGrazers=true
/* Sets max number of grazing animals.
/* You should decrease this number if you encounter server lag.
grazerMaxCount=10
grazingSheep=true
grazingCows=true
grazingPigs=true
grazingChickens=false

/* BIOMES:
/* Enabled/Disables the growth of vegetation on
/* certain biomes.
growForestBiome=true
growRainforestBiome=true
growShrublandBiome=true
growSavannahBiome=true
growPlainsBiome=true
growSeasonalForestBiome=true
growIceDesertBiome=true
growDesertBiome=true
growHellBiome=true
growSwamplandBiome=true
growTaigaBiome=true
growTundraBiome=true

/* EVENTS:
/* The following parameters determine how many ticks of
/* 100 ticks a specific type of action is being executed.
/* (Example: If grassPercent is set to 60, there is the possibility
/*  of grass growing at 60/100 ticks if a grass block is found 60 times.
grassPercent=35
plantsPercent=3
mossPercent=10
lilyPadPercent=5
vinePercent=5
grazePercent=10