Solved Portforwarding help!@!

Discussion in 'Bukkit Help' started by J0sh_R0x, Feb 22, 2012.

Thread Status:
Not open for further replies.
  1. Offline

    J0sh_R0x

    Look, i've followed every-new-thing BY THE BOOK everything step by step watch at least 20 videos and read heaps of forum threads my port has been forwarded correctly its just people cannot connect! My external ip is 121.223.149.92 and it says the port is closed and I've enabled UpnP, but it still says its closed can anyone help me? Oh bye the way sorry if this has been posted many times.
     
  2. Offline

    CRAZYxMUNK3Y

    Do you have TeamViewer?
     
  3. Offline

    J0sh_R0x

    No . . .
     
  4. Offline

    CRAZYxMUNK3Y

    Time to do everything by text :p

    Try http://www.canyouseeme.org/ with the port you will run MC on (usually 25565).
    If that doesn't work (as you stated above, it probably won't), the go into your modem, portforwarding area, and portforward MC...

    Need Help?

    Go to http://portforward.com/, select your modem type, click skip add, then select Minecraft Server and it will show you step by step instructions on how to do it.

    One that it done, go back to canyouseeme.org and test it again.
     
  5. Offline

    J0sh_R0x

    I followed that about 2 hours ago went to that exact adress both of the links, still says its closed. literally read each step 10times to check
     
  6. Offline

    CRAZYxMUNK3Y

    What is your setup?

    Modem > Router > PC
    or
    Modem > PC

    If a router is involved, it gets more complicated...

    Also, have you added an exception to your firewall (if on Windows)?

    That also blocks incoming connections.
     
  7. Offline

    J0sh_R0x

    My firewall isnt up and Im on a laptop connecting to my Router if that makes any sense...
     
  8. Offline

    CRAZYxMUNK3Y

    If you don't mind (so i can get a sense of your set-up), go into cmd and type

    tracert -h 5 www.google.com
     
  9. Offline

    J0sh_R0x

    That is what came up, although im not sure what it means
     

    Attached Files:

  10. Offline

    CRAZYxMUNK3Y

    Forgot to add :p

    Once it's done, right click the CMD window, click Mark, highlight everything from tracert down, press enter, then paste on here
     
  11. Offline

    THedyldozer

    Hello i had the same problem with the portfowarding and was so close to making a server but now im back to the first step can u please help me.
     
  12. Offline

    CRAZYxMUNK3Y

    Sure thing... Have you followed the steps i menationed above?
     
  13. Offline

    J0sh_R0x

    Tracing route to www.l.google.com [74.125.237.16]
    over a maximum of 5 hops:

    1 13 ms 99 ms 99 ms BigPond.BigPond [10.0.0.138]
    2 26 ms 26 ms 26 ms 172.18.221.3
    3 26 ms 26 ms 26 ms 172.18.78.46
    4 26 ms 26 ms 27 ms CPE-61-9-135-136.vic.bigpond.net.au [61.9.135.13
    6]
    5 26 ms 27 ms 26 ms TenGigabitEthernet7-3.bth3.Hobart.telstra.net [2
    03.45.29.181]

    Trace complete.
    Thats what come up, i hope is it any help :s
     
  14. Offline

    CRAZYxMUNK3Y

    All seems fine... The only thing i can possibly think of is you didn't quite port forward correctly :S

    If you want, you can download TeamViewer and make an account (free) and i can look at it if you want...

    That goes for THedyldozer too
     
  15. Offline

    J0sh_R0x

    Sure, i will download team-viewer and make an account, because i can assure i HAVE port forwared it correctly

    I've got teamviewer, not to say i barely know how it works :/ but if you could like connect a partner to me or something?
     
  16. Offline

    CRAZYxMUNK3Y

    Just PM me the ID and Pass (that is on the main screen) and i will connect and have a look...
     
  17. Offline

    J0sh_R0x

    What does it DO exactly can you access any personal information? :S
     
  18. Offline

    CRAZYxMUNK3Y

  19. Offline

    J0sh_R0x

    Ok i've sent you the things :)

    @!@!@!@ SOLVED !@!@!@!@!@ Thanks to Crazy, EXTREMELY appreciated.

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: May 24, 2016
  20. Offline

    CRAZYxMUNK3Y

    Just so others know, change the thread status to "Solved" by using the "Thread Tools > Edit Thread" option at the top of the thread.
     
  21. Offline

    TreaverHoerig

    Crazy Monkey, I need your help also. I've downloaded TeamViewer and I have everything to setup a server (Computer and Domain) I just need help forwarding ports. I've done it but everytime it says it's like closed? Please Help me
     
Thread Status:
Not open for further replies.

Share This Page