DynMap + No-Ip

Discussion in 'Bukkit Help' started by ArsenArsen, Jun 22, 2014.

Thread Status:
Not open for further replies.
  1. Offline

    ArsenArsen

    I cant set-up dynmap on No-Ip server, so im wondering how?
     
  2. Offline

    ztg123

    Maybe No-Ip does not allow data transfer on port 8123 on it's subdomains.
     
  3. Offline

    ArsenArsen

    So i need to host on my external site?

    Or change port?

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 9, 2016
  4. Offline

    ztg123

    Firstly try changing the Plugin's port. BUT: It's working to connect to DynMap with Your external ip? ( Example :92.63.21.121:8123)
     
  5. Offline

    ArsenArsen

  6. Offline

    ztg123

    I was sure. You need to PortForward the 8123 port from Your router, or use DMZ if avalible.
     
  7. Offline

    ArsenArsen

    Did dont work ztg123

    Shall i try with port 80? ztg123

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 9, 2016
  8. Offline

    ztg123

    If Port Foward doesn't work, You should try to host Your DynMap on a hosted website from a provider. It might be a blocked port from USP or something like this.

    Edit: Try with port 80 but it needs to be port-forwarded.
     
  9. Offline

    ArsenArsen

    Ok ztg123 ill try

    Naa dont work ztg123

    Please help T-T

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 9, 2016
  10. Offline

    ztg123

    ArsenArsen
    Hi again. I will try setting up dynmap with no-ip. Wait for a response. It shouldn't take long.

    Edit:
    So, man. Start the server with DynMap and Xampp/Wamp Server or what You use as You usually do. Then in Your browser type Your No-Ip subdomain two dots the 8123. Is should look like this:
    Code:
    http://Example.Example.Example:8123/
    This should work for You. Don't forget to use the DUC from No-Ip to renew Your domain every 5 minutes with Your current IP address. Hope it works man! This would work only if You Port-Forwarded port 8123.
     
  11. Offline

    ArsenArsen

    ztg123 do i need to connect to LAN cabble or i can on wireless?
     
  12. Offline

    ztg123

    ArsenArsen, You can do it wathever You want, it does not matter when You access dynmap from LAN. But, when You start using it by Internet, You would need to port forward port 8123.
     
Thread Status:
Not open for further replies.

Share This Page