Solved Big Problem, World won't load or takes AGES to load!

Discussion in 'Bukkit Help' started by xXCooLDuDe360Xx, May 3, 2014.

Thread Status:
Not open for further replies.
  1. Offline

    xXCooLDuDe360Xx

    Hello everybody, I've run into a problem regarding my Minecraft Bukkit server and it would be really helpful if some genius minds out here would care to help me :p

    Here's the problem,
    So I have a server with a few plugins and it's been running smoothly for quite a long time.
    I accidentally typed a wrong command in WorldEdit, "//replacenear 49 0 150" into "replacenear 0 150", which ended up replacing all air with comparators =.=

    Obviously the server crashed after that but i just tried to reboot it, all the other worlds load fine but then it's just this world that tttttiiiiimmmmmeeee (long time) to load, it literally goes like:

    [01:02:03 INFO] Loading world HemmorageTest: 1%
    [01:02:04 ERROR] <bunch of random stuff>
    [01:05:19 ERROR] <bunch of random stuff>
    [01:07:54 ERROR] <bunch of random stuff>
    [01:09:01 ERROR] <bunch of random stuff>
    [01:10:42 ERROR] <bunch of random stuff>
    [01:12:03 INFO] Loading world HemmorageTest: 2%

    So I came to the conclusion that WorldEdit must have processed my request and placed down god knows how many comparators and decided to go into MCEdit. Guess what, I was right :p
    I proceeded to remove all the comparators by replace it with air, I SAVED.

    I tried to load up the world in single player and it got stuck on "Building Terrain" so I came to the conclusion that the chunks must have been corrupted. Went back onto MCE and used the "Repair Regions" tool, "Successfully Repaired Regions" it said. I SAVED.

    Fast forward a few days, I re-imported the world onto my server and teleported to it, I got on and started walking around, "Oh! It's working! :D" I said to myself.... guess I spoke too soon because a few seconds later, "Connection Lost, io,netty.internal exception error" or something like that. I checked my console and everything just... froze...

    I typed in a few commands like, "Say f***" or "Say test", but nothing happened.
    I then tried to reconnect to the server but got disconnected again for the same reason.
    Before I decided to force quit I tried "Stop" but that didn't work either.

    Fast forward another few days, every time I turn on the server to play, it loads everything perfectly fine and even gets to "Done!" and loads a few automatic messages I programmed the server to say every 5 mins or so. Problem is, whenever I join, it just... stops. Time frozen, server crashes, everything stops. Dead silence followed by "Connection Lost, io.netty. blah blah blah"

    I've tried as many things as I could but that world is really important to me and I cant risk losing it, no it's not my first world or anything like that =.=

    I need to use this world for an animation which i'm HALFWAY into =....=

    ------------------------------------------------------------------------------------------------------------

    Long story short, I made a mistake while using WorldEdit which caused comparators to take over the world, I removed the comparators using MCEdit but the world wouldn't function normally since.

    ------------------------------------------------------------------------------------------------------------
    EXTRA INFO / THE IMPORTANT INFO WHICH NOBODY CARES ABOUT

    Laptop Specs:
    Mac OS X
    Version 10.6.7
    Processor: 2.3GHx Intel Core i5
    Memory: 4GB 1333 MHx DDR3
    Startup Disk: Macintosh HD

    Plugins:
    WorldEdit
    AutoBroadcast
    Essentials
    MetaCycler
    FakeMessager
    MultiverseSchematic Brush

    -------------------------------------------------------------------------------------------------------------
    I'm sorry if there are any typos / grammatical errors / things that I haven't said clearly. I'm trying really hard to fix the problem and I don't really want to bother checking.

    I hope somebody here will be able to help me out, I really can't solve this problem by myself, thanks!
     
  2. Offline

    RZeroX

    Mcedit
    Hit Control A (Select All)
    Hit the Number 4 (Fill Replace)
    Pick the Block you want to Remove, 97
    Hit Enter (or Ok)
    Now Hit either 'R' or the Word Replace on the left hand side
    Now pick the block you want to replace it with 0 for air or type air
    Now hit Enter or OK
    Now hit Enter Or the word Replace on the Left hand side
    http://www.mcschematics.com/index.php?topic=1310.0
     
  3. Offline

    xXCooLDuDe360Xx

    That doesn't really help
     
  4. Offline

    RZeroX

    i Thought you replaced the air what i wrote above should be able to replace the air back but change the block id from 97
     
  5. Offline

    xXCooLDuDe360Xx

    "//replacenear 0 150" replaced all air blocks near me with comparators

    I've ALREADY removed the comparators
     
  6. Offline

    RZeroX

    If you don't mind could you send me your map so i could do some testing?
     
  7. Offline

    xXCooLDuDe360Xx

    Umm... depends, I tried uploading the file but it, well...
    image says all :v
     

    Attached Files:

  8. Offline

    xXCooLDuDe360Xx

  9. Offline

    RZeroX

  10. Offline

    xXCooLDuDe360Xx

    <Edit by Moderator: Redacted mediafire url>
     
    Last edited by a moderator: Nov 2, 2016
  11. Offline

    xXCooLDuDe360Xx

    I just turned on my server and copied the log out:

    --------------------------------------------------------------------------------------------------------------------------------------------------------
    [19:33:31 INFO]: Starting minecraft server version 1.7.2
    [19:33:31 INFO]: Loading properties
    [19:33:31 INFO]: Default game type: SURVIVAL
    [19:33:31 INFO]: Generating keypair
    [19:33:32 INFO]: Starting Minecraft server on *:25565
    [19:33:33 INFO]: This server is running CraftBukkit version git-Bukkit-1.7.2-R0.3-b3020jnks (MC: 1.7.2) (Implementing API version 1.7.2-R0.3)
    [19:33:37 INFO]: [FakeMessager] Loading FakeMessager v1.5
    [19:33:37 INFO]: [WorldEdit] Loading WorldEdit v5.6
    [19:33:37 INFO]: [AutoBroadcast] Loading AutoBroadcast v1.1
    [19:33:37 INFO]: [MetaCycler] Loading MetaCycler v1.0
    [19:33:37 INFO]: [Multiverse-Core] Loading Multiverse-Core v2.4-b527
    [19:33:37 INFO]: [WeatherMan] Loading WeatherMan v0.5.2
    [19:33:37 INFO]: [Essentials] Loading Essentials v2.12.2
    [19:33:37 INFO]: [SchematicBrush] Loading SchematicBrush v0.4-9
    [19:33:37 INFO]: [EssentialsProtect] Loading EssentialsProtect v2.12.2
    [19:33:37 INFO]: [EssentialsSpawn] Loading EssentialsSpawn v2.12.2
    [19:33:37 INFO]: [EssentialsChat] Loading EssentialsChat v2.12.2
    [19:33:37 INFO]: [EssentialsAntiBuild] Loading EssentialsAntiBuild v2.12.2
    [19:33:37 INFO]: Preparing level "world"
    [19:33:37 INFO]: ----- Bukkit Auto Updater -----
    [19:33:37 INFO]: It appears that you're running a Beta Build, when you've specified in bukkit.yml that you prefer to run Recommended Builds.
    [19:33:37 INFO]: If you would like to be kept informed about new Beta Build releases, it is recommended that you change 'preferred-channel' in your bukkit.yml to 'beta'.
    [19:33:37 INFO]: With that set, you will be told whenever a new version is available for download, so that you can always keep up to date and secure with the latest fixes.
    [19:33:37 INFO]: If you would like to disable this warning, simply set 'suggest-channels' to false in bukkit.yml.
    [19:33:37 INFO]: ----- ------------------- -----
    [19:33:38 INFO]: Preparing start region for level 0 (Seed: -798895669)
    [19:33:39 INFO]: Preparing spawn area: 0%
    [19:33:41 INFO]: Preparing spawn area: 4%
    [19:33:42 INFO]: Preparing spawn area: 21%
    [19:33:43 INFO]: Preparing spawn area: 34%
    [19:33:44 INFO]: Preparing spawn area: 50%
    [19:33:45 INFO]: Preparing spawn area: 65%
    [19:33:46 INFO]: Preparing spawn area: 88%
    [19:33:47 INFO]: Preparing start region for level 1 (Seed: -6158446275502541083)
    [19:33:48 INFO]: Preparing spawn area: 20%
    [19:33:49 INFO]: Preparing spawn area: 27%
    [19:33:50 INFO]: Preparing spawn area: 48%
    [19:33:51 INFO]: Preparing spawn area: 75%
    [19:33:54 INFO]: Preparing spawn area: 82%
    [19:33:55 INFO]: Preparing start region for level 2 (Seed: -798895669)
    [19:33:56 INFO]: Preparing spawn area: 67%
    [19:33:58 INFO]: Preparing spawn area: 97%
    [19:33:58 INFO]: [FakeMessager] Enabling FakeMessager v1.5
    [19:33:58 INFO]: [FakeMessager] Found config.yml!
    [19:33:58 INFO]: +---------------------------------------+
    [19:33:58 INFO]: | FakeMessager V 1.5 - Enabled |
    [19:33:58 INFO]: +---------------------------------------+
    [19:33:58 INFO]: [WorldEdit] Enabling WorldEdit v5.6
    [19:33:58 INFO]: WEPIF: Using the Bukkit Permissions API.
    [19:33:58 INFO]: [AutoBroadcast] Enabling AutoBroadcast v1.1
    [19:33:58 INFO]: AutoBroadcast Version 1.1 Has Been Enabled!
    [19:33:58 INFO]: [MetaCycler] Enabling MetaCycler v1.0
    [19:33:58 INFO]: MetaCycler by ravand enabled
    [19:33:59 INFO]: [Multiverse-Core] Enabling Multiverse-Core v2.4-b527
    [19:33:59 INFO]: [Multiverse-Core] - Version 2.4-b527 (API v14) Enabled - By Rigby, fernferret, lithium3141 and main--
    [19:33:59 INFO]: [AllPay] - Version 10.0 - hooked into Essentials Economy for Multiverse-Core v2.4-b527
    (I skipped the other world loadings here cuz they were normal, (20% -> 60% -> 90% -> 100%) etc.)

    [19:34:35 INFO]: [Multiverse-Core] Loading World & Settings - 'HemmorageAlpha' - Env: NORMAL - Type: NORMAL & seed: 2960257066719487013
    [19:34:35 INFO]: Preparing start region for level 6 (Seed: 2960257066719487013)
    [19:34:38 INFO]: Preparing spawn area for HemmorageAlpha, 20%
    [19:34:39 INFO]: Preparing spawn area for HemmorageAlpha, 32%
    [19:34:40 INFO]: Preparing spawn area for HemmorageAlpha, 53%
    [19:34:41 INFO]: Preparing spawn area for HemmorageAlpha, 77%
    [19:34:47 INFO]: Preparing spawn area for HemmorageAlpha, 77%
    [19:34:49 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:34:54 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:34:57 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:14 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:23 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:32 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:33 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:34 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:37 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:38 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:40 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:41 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:42 INFO]: Preparing spawn area for HemmorageAlpha, 93%
    [19:35:43 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:35:49 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:35:55 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:36:12 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:36:26 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:36:30 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:36:36 INFO]: Preparing spawn area for HemmorageAlpha, 97%
    [19:37:02 INFO]: [Multiverse-Core] 7 - World(s) loaded.
    [19:37:04 INFO]: [WeatherMan] Enabling WeatherMan v0.5.2
    [19:37:08 INFO]: [WeatherMan] +-------------------------------------------------------------------+
    [19:37:08 INFO]: [WeatherMan] + This version of WeatherMan was not tested with CraftBukkit v1.7.R1 +
    [19:37:08 INFO]: [WeatherMan] + Check updates at http://dev.bukkit.org/server-mods/weatherman/ +
    [19:37:08 INFO]: [WeatherMan] + or use this version at your own risk +
    [19:37:08 INFO]: [WeatherMan] +-------------------------------------------------------------------+
    [19:37:09 INFO]: [Essentials] Enabling Essentials v2.12.2
    [19:37:30 INFO]: Essentials: Using config file enhanced permissions.
    [19:37:30 INFO]: Permissions listed in as player-commands will be given to all users.
    [19:37:31 INFO]: [SchematicBrush] Enabling SchematicBrush v0.4-9
    [19:37:31 INFO]: [SchematicBrush] SchematicBrush v0.4-9 loaded
    [19:37:31 INFO]: [EssentialsProtect] Enabling EssentialsProtect v2.12.2
    [19:37:31 INFO]: [EssentialsSpawn] Enabling EssentialsSpawn v2.12.2
    [19:37:32 INFO]: [EssentialsChat] Enabling EssentialsChat v2.12.2
    [19:37:32 INFO]: [EssentialsAntiBuild] Enabling EssentialsAntiBuild v2.12.2
    [19:37:32 INFO]: Server permissions file permissions.yml is empty, ignoring it
    [19:37:35 INFO]: Done (237.966s)! For help, type "help" or "?"
    [19:37:36 INFO]: [TeamWnJ] Remember to Subscribe to GamerzzWnJ's YouTube Channel @ https://www.youtube.com/GamerzzWnJ.
    >say hi
    >say hi
    [19:38:24 INFO]: [WeatherMan] WeatherMan v0.5.2 is outdated! Recommended version is v1.0.0
    [19:38:24 INFO]: [WeatherMan] http://dev.bukkit.org/server-mods/weatherman/
    [19:38:27 INFO]: /127.0.0.1:61979 lost connection: Disconnected
    [19:38:27 INFO]: [Server] hi
    [19:38:27 INFO]: [Server] hi
    [19:38:28 WARN]: Can't keep up! Did the system time change, or is the server overloaded? Running 52641ms behind, skipping 1052 tick(s)
    [19:38:32 WARN]: Can't keep up! Did the system time change, or is the server overloaded? Running 3928ms behind, skipping 78 tick(s)
    >
    It keeps on "Can't keep up!" -ing afterwards and I cant join.
    I just checked the console right after typing ^ that line and it said:
    [19:43:59 WARN]: Can't keep up! Did the system time change, or is the server overloaded? Running 306835ms behind, skipping 6136 tick(s)
     

    Attached Files:

  12. Offline

    Lolmewn

    Anything special about the spawn of that world? Lots of lava/water?
     
  13. Offline

    RZeroX

    Maybe this can't be fixed as it times out a lot also in single player it crashes minecraft
    I think i fixed it will post upload in a sec
    Edit:Something is causing it to time-out when in game.
    only this part of the map loads
    Untitled.png
     
  14. Offline

    xXCooLDuDe360Xx

    No, aside from the fountain, there really isn't any visible water close to spawn, RZeroX has a picture and that market are is my spawn.

    Oh but there is a farm close to spawn, about 50-60 blocks forward from the pic :v
    The farm's connected to a river, but it's not really a lot of water :v

    View attachment 19408
    See if this helps :v
    Lolmewn You can see the farms and the river i was talking about :v

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 7, 2016
  15. Offline

    RZeroX

    What happened to the other chunks in the world as nothing else loads?
     
  16. Offline

    xXCooLDuDe360Xx

    the chunks outside are missing cuz i haven't explored that far yet, no biggy there

    Oh, adding onto the picture, the "Where I think the problem is" load fine in game, I saw it for a bit before I got disconnected from my server.

    ^^ This was right before the ""Oh! It's working! :D" I said to myself.... guess I spoke too soon because a few seconds later" thing

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 7, 2016
  17. Offline

    Lolmewn

    Weird stuff, I don't know then. Doesn't look like you got a huge amount of plugins either.
     
  18. Offline

    xXCooLDuDe360Xx

    I just tried something and managed to get into the world in single player.

    I used Ctrl+A (Select all) on MCEdit to copy everything and made that a schematic.
    I then created a blank world and pasted the schematic.

    I tried to enter that world in single player but it was really laggy and the chunks wouldn't load, i'm pretty sure the internal server crashed. This is all I Screen shot 2014-05-04 at 6.38.27 PM.png saw.
     
  19. Offline

    xXCooLDuDe360Xx

    Guys, not sure if i'm asking for too much, but could we try to get some staff to work on this?
     
  20. Offline

    DrPyroCupcake

    xXCooLDuDe360Xx you could try. My best guess is that chunk might be corrupt, also do you have a large amount of entities in the chunk? Broken blocks etc...
    You can try and read this. If I have time when I get home from school I will download the map and look around.
     
  21. Offline

    xXCooLDuDe360Xx

    Thanks man, I too think that the chunk is corrupted but I've already tried to use MCEdit to un-corrupt it :v
    There aren't many entities in the chunk, mob spawning is off and the only entities are some item frames with maps in them.
    At first, I thought that maybe some of the comparators broke into tile entities and just laid there, but there were none when I used MCEdit...

    I'll try rendering the area with Cinema 4D and see how that looks :v

    Thanks for help btw.
     
  22. Offline

    LHammonds

    You've been running the world for a "long time" but don't have backups of the world BEFORE you killed it with WorldEdit?

    I think you were on the right path the what you started to do.

    Take the world seed, plug it into a new server and let it generate the exact same world (unedited obviously).

    Then add a WorldEdit plugin that allows for safe pasting of very large schematics such as SafeEdit or AsyncWorldEdit (IIRC)

    Then paste your schematic in the right spot and it shouldn't crash the server while it is pasting the schematic slowly.

    Hopefully the schematic does not include the error data causing issues.

    EDIT: I downloaded the file, loaded it in SP and it worked ok. Then loaded it in a CraftBukkit server and sure enough, got the same "can't keep up" errors and inability to connect.

    Looking at the files in the "region" folder, I noticed "r.0.0.mca" was a whoppin 42 MB which was many times larger than any other files. I deleted it. Then started the server and it ran smooth after that. However, a chunk of your city was reset (if you do this, make sure the level seed is set to the matching/original value of 2960257066719487013).

    At this point, you might only have a small amount to restore with selective copy/pastes in WE.

    LHammonds
     
  23. Offline

    TreeDB

  24. Offline

    xXCooLDuDe360Xx

    I love you guys, thanks for the support! If it works, i'll be sure to give credit to you guys in the animation! ^.^


    View attachment 19669 Instead of r.0.0.mca being huge, this r.-4.-2.mca seems bigger
    My r.0.0.mca is only 16KB

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 7, 2016
  25. Offline

    LHammonds

    My point is that I deleted r.0.o.mca and the server issue disappeared and was able to connect without issue. The problem is in that file. So either trash the file and rebuild from WE copy/paste (which may not work well) or focus your tools on fixing that 1 file (don't even load the others, isolate it where only that 1 file is loaded in the tools)

    PS - Its never good to be hearing voices in your head!

    LHammonds
     
  26. Offline

    xXCooLDuDe360Xx

    Screen shot 2014-05-16 at 10.10.22 PM.png I've deleted the r.0.0.mca and started it in a server. I got into the world and everything loaded very slowly, I saw a few buildings but that was it :v

    Lost connection after that and couldn't join back

    EDIT: I was able to join back but I had to wait a while, again, all I saw were a few buildings before I lost connection.

    Also, I've tried to downgrade my Minecraft version to 1.4.5 to recreate the exact same world, however it simply doesn't work. Minecraft crashes if I attempt to load it at 1.4.5

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jun 7, 2016
  27. Offline

    LHammonds

    Hmm...I guess I'll download it again and re-create what I did and post a link for you to download it.

    EDIT: Ok, I have a CraftBukkit 1.7.2-R0.3 server with your world in it and configured, ready-to-go. Just extract it to C:\CraftBukkit\ and double-click the "start-server.bat" but if you are on a Mac, you'll need to make your own startup file. :) Once its running, you can log into it with a vanilla 1.7.2 client and WorldEdit will work and I even through in a nifty plugin that shows your WE selections to help prevent selection goof ups...but you can remove it by just deleting the plugin. The permissions are setup in such a way that anyone that joins the server gets full access to everything so please fix that to your liking. Sending you a PM with a download link in a little bit.
     
  28. Offline

    xXCooLDuDe360Xx

    Thanks a lot guys!
    There's a bunch of sand everywhere but i'm gonna put in a schematic over it, but the world works fine now!
    Other than the missing chunk, everything else is back to normal! Thanks LHammonds! :D
    Screen shot 2014-05-23 at 7.33.43 PM.png Screen shot 2014-05-23 at 7.33.27 PM.png
     
  29. Offline

    LHammonds

    You're welcome. That city looks familiar to me. Was that a save-game download or did you make it from scratch?

    If that was from a savegame, you can copy/paste the missing chunk back into that one.

    LHammonds
     
  30. Offline

    xXCooLDuDe360Xx

    That's exactly what I did :p

    And yea, I built the city up from scratch but I was heavily inspired certain YouTubers :p
    That's probably why you thought it looked familiar :p
     
Thread Status:
Not open for further replies.

Share This Page