[SEC/MECH] SimpleChestLock 1.2.2 - Simplified chest locking [1.5.1-R0.2]

Discussion in 'Archived: Plugin Releases' started by DemmyDemon, May 16, 2011.

  1. Offline

    DemmyDemon

    IMPORTANT NOTICE:

    This plugin is no longer being developed.
    I know I've said that there will be no replacement for this before the Official Plugin API, but thanks to some very generous donations I've been inspired to make a Bukkit-based replacement.

    It's called KonseptLocks and will hopefully be hosted on dev.bukkit.org as soon as I can get it properly tested.

    While it will be similar to SCL in many ways, it will not feature the "combination lock" system, as feedback tells me it's hardly ever in use.

    It will not be compatible with SCL and will have a completely new locking file system, which will hopefully remedy any and all "oops, all your locks are gone" problems. If you have 3600 locks you fear you will have to re-lock, don't worry; I'll make an SCL importer for KonseptLocks.


    SimpleChestLock - Simplified chest locking:
    Version: v1.2.2

    Veeery simplified (for the users, anyway) chest locking, sort of like LockChest and others, but very simplified.
    Simply slap a chest with a stick, and it's locked. Only you can access it.
    Slap it with a stick again, and it'll be open for everyone.

    [chest]+[stick]=:cool:

    NOTE: May only lock the chest actually slapped with the stick, depending on settings.
    This means that two people can share a double chest, but it also means that if you forget to lock one half you might as well not have bothered.
    Make sure the settings are configured to do what you want!

    Features:
    • Lock chests slapstick-style!
    • Lock jukeboxes, furnaces, dispensers or whatever you want! Configurable!
    • Doors, trap doors, levers, buttons and pressure plates supported, but see the note below!
    • Configure a different key if you don't like sticks.
    • Lock it with a combination, if you want. (see "Using combinations" below)
    • Lock it for someone else, if you need to.
    • Limit locking using WorldGuard region restriction. (Entirely optional!)
    • Trust system, so you can share the stuff you lock. (see "Trust system" below)
    • Limit system, so you can set how many items users can lock. (see "Using limits" below)
    • Decide who locks what (see "Who locks what?" below)
    • Uses the Bukkit built-in permissions system.
    • Share a chest or door with someone by locking half each on a double-chest or double-door (optional, using the lockPair option).
    • Locked chests can be made to suck in items.
    • Protects locked blocks against destruction.
    • Keep those pesky griefers out of your stuff!
    • Your suggestion here (Except iConomy, that's not going to happen)
    Quick Step Guide for Noobs (by Davecraft) (open)

    1. Install SimpleChestLock, see http://wiki.bukkit.org/Installing_Plugins for details.
    2. Add a permission plug-in http://plugins.bukkit.org (search "permissions") to handle the permission nodes.
    3. Watch the video (see the "Video demonstration by BrandonHopkins" part.)
    4. Add permission variables (see the "Permission Nodes" part) in the permissions plug-in directory. See documentation for your chosen plugin on how to do this.
    5. Edit your settings.yml file. See the "Configuration" part for explanation of the values.
    6. To get the permissions working, see the example under "Who can lock what?"
    7. Enjoy!
    Video demonstration by BrandonHopkins (Somewhat outdated) (open)
    Video demonstration by SeaborgiumMC (open)
    Video tutoral in German by Mamuschkas (open)

    A note on doors, levers, pressure plates and buttons

    When it comes to doors, levers, pressure plates and buttons (DLPB), this plugin only affects who can use them and destroy them.
    That means it does not concern itself with iron doors at all, since nobody can use them, and it does not impact how a door reacts to, for example, redstone current.
    Also, if you place an iron door, and then a button beside it, then lock that button, it's still unsafe: Anyone can come along and place a button or lever on the other side of the door.
    That's why the DLPB functionality is only intended to compliment other plugins, such as WorldGuard.
    This is how I use it: The WorldGuard region allow usage of all buttons and levers, but disallows building. Now I can use SCL to lock the levers and buttons I want protected, and nobody can get around it because WorldGuard will keep them from placing buttons and levers, or digging around them.

    Download SimpleChestLock

    Downloaded over 74.000 times!
    Source Code

    Commands (open)
    /scl reload
    Reloads the chests file and settings -- WILL DISCARD ANY CHEST LOCKS SINCE LAST LOAD, so /scl save first if you don't want that!
    Takes an optional argument; the file to save to. If no file name is given, Chests.txt is used.

    /scl trust
    Takes a lot of arguments, but the basics are add, remove, list and clear.
    Read more about trust under the "Trust system" spoiler!

    /scl save
    Save the chests file right now, rather than wait for the plugin to be disabled to do so. Note that the plugin will also autosave every 5 minutes or so, just in case the server crashes.
    Takes an optional argument; the file to save to. If no file name is given, Chests.txt is used.

    /scl limit
    Shows how many items you can lock, if you're limited.

    /scl status
    Tells you how many items each player has locked, and the total amount of locked items.

    /scl as <user>
    If a user is given, all chests locked from now on will be locked in that user's name.
    If no user is given, all chests locked from now on will be in your own name.
    Very handy for admins that don't like it when users risk their life's savings by leaving them open to public access.
    Careful with this! If you have simplechestlock.command.as permission, but not simplechestlock.ignoreowner, you can lock yourself out of chests as you can't unlock it again!
    Permissions nodes (open)
    This plugin uses the following permissions:
    • simplechestlock.command.reload - Access to /scl reload
    • simplechestlock.command.trust - Access to the /scl trust commands
    • simplechestlock.command.save - Access to /scl save
    • simplechestlock.command.status - Access to /scl status
    • simplechestlock.command.as - Access to /scl as <user>
    • simplechestlock.ignoreowner - Unlock any item, use any item.
    • simplechestlock.ignoreRegion - Don't ask for WorldGuard's permission, even when it's enabled.
    • simplechestlock.nolocklimit - Lock as much as you want, even when limiting is on
    • simplechestlock.lock - Access to locking blocks
    • simplechestlock.usecombo - Access to locking with a combination lock
    If you have defined usePermissionsWhitelist in Configuration (details below), you can specify what blocks are lockable using the locktype permission set.
    Note that you still need the simplechestlock.lock permission to lock stuff, even when whitelisting is activated.
    • simplechestlock.locktype.Lockable_Name_Here - Gives permission to lock Lockable_Name_Here blocks (see " Lockable blocks" below)
    • simplechestlock.locktype.chest - ..for example, gives access to lock chests.
    • simplechestlock.locktype.* - Lock any lockable item.
    This plugin also defines the following nodes for convenience:
    • simplechestlock.* - Full access - Sets simplechestlock.command.*, simplechestlock.ignoreowner, simplechestlock.lock, simplechestlock.locktype.*
    • simplechestlock.command.* - Access to the commands - Sets simplechestlock.command.reload, simplechestlock.command.save, simplechestlock.command.status, simplechestlock.as, simplechestlock.trust
    Lockable blocks (open)

    If you want to enable the permissions-based white-list, use these names:
    • chest
    • furnace
    • burning_furnace
    • dispenser
    • jukebox
    • wooden_door
    • lever
    • stone_button
    • trap_door
    • stone_plate
    • wood_plate
    • brewing_stand
    • enchantment_table
    • fence_gate
    This is fully configurable (see "Configuring lockables" section below), but remember that the permissions are all lower case!
    Who can lock what? (open)

    To define who can lock what, you need two components.
    First, you have to enable it in the config.yml:
    Code:
    usePermissionsWhitelist: true
    Next, you have to define permissions.
    In this example a user called someDude will have permission to lock chests and trap doors.

    Note that this is just an example and might look different for your permissions plugin.
    See "Permission nodes" for more details and "Lockable blocks" for the list of blocks you can lock.

    Code:
    users:
        someDude:
            permissions:
                - simplechestlock.lock
                - simplechestlock.locktype.chest
                - simplechestlock.locktype.trap_door
    Please note that even with a locktype allowed you still have to give simplechestlock.lock!
    Configuring lockables (open)
    The term "a lockable" is used here to describe a block that this plugin will facilitate the locking of.
    This is entirely configurable, but unless you know what you are doing you should back everything up before making changes. This can have disastrous consequences for your lock file and possibly your whole server, depending on how things are set up. Handle with care.

    The different lockables sections do this:

    lockable
    This is a simple list of all the blocks that are to be considered lockable. A standard block only needs to appear here.
    Keep in mind that a block must always appear here, even if it's also in a different section.

    protectiveAura
    This is the list of blocks that will have protective auras on them. Useful for stopping people from using hoppers to suck your stuff out of chests.
    Remember that you must also enable the useProtectiveAuras option, which is off by default!

    lockPair
    This is the list of blocks that will be locked in pairs if the lockpair setting is active.
    The default is chests and wooden doors, because of double chests and double doors.

    leftLock
    This bit is obsolete, as it stems from the time when you could still left-click doors to open them etc.

    lockVertical
    This is a list of blocks that have a natural "top" and "bottom" part. Currently, this is only doors, but who knows what might be relevant in the future. When a block listed here is locked SCL will search above and below it for it's other half and lock it as well, ignoring the lockpair setting.

    canSuck
    This section details what blocks will attempt to suck up items. In theory, any block with a container can suck up items (like a furnace), but only chests and dispensers have been tested, so use caution.
    If the lockedChestsSuck option is disabled, this section is entirely irrelevant.

    Default values:
    Code:
    lockables:
        lockable:
            - CHEST
            - DISPENSER
            - JUKEBOX
            - ENCHANTMENT_TABLE
            - BREWING_STAND
            - WORKBENCH
            - FURNACE
            - BURNING_FURNACE
            - LEVER
            - STONE_BUTTON
            - TRAP_DOOR
            - FENCE_GATE
            - STONE_PLATE
            - WOOD_PLATE
            - WOODEN_DOOR
            - BEACON
        protectiveAura:
            - CHEST
            - DISPENSER
        lockPair:
            - CHEST
            - WOODEN_DOOR
        lockVertical:
            - WOODEN_DOOR
        canSuck:
            - CHEST
            - DISPENSER
    So, what blocks can I make lockable?
    Short answer: Pretty much all of them.
    Long answer:
    It has to be a block bukkit knows of, and has a Material associated with.
    For a list of materials, have a look at the Material.java file in the Bukkit project on GitHub.

    Note that materials must be specified in UPPER CASE and otherwise exactly as Bukkit expects them!


    As of 1.0.2 you can also use numerical IDs, allowing custom blocks and stuff.
    Thanks go out to @albatrossen for that little fix.

    Trust system (open)

    In order to manage trust, you need the simplechestlock.command.trust permission!

    To add Bob to your trusted friends: /scl trust add bob
    To list your trusted friends: /scl trust list
    To remove Bob: /scl trust remove bob
    To clear the whole list: /scl trust clear
    To give access to everyone: /scl trust add *

    That last one, giving permission to *, is intended for just locking something so it's protected and can't be locked by anyone else. For example for an admin to lock the donation box to prevent it's destruction, but still have it open for people to put in donations.

    You can trust a whole group!
    Just /scl trust add g:dudes where "dudes" is the name of a group. Note that this isn't magic, it checks for the permission group.dudes, like how WorldGuard checks groups and as is emerging as a group check standard.

    Trust is in the locked item and persists there!
    This means that when you lock something, your current trust list is copied to the item, and stays there. If you want to modify an items trust you'll have to unlock it and lock it again with a new list. Changing your trust list will not alter already locked stuff.
    Perhaps you trust Bob to open that door, but not to access that chest? Perhaps you want * to activate that button, but not that switch?

    The trust lists get saved so you don't need to re-type it all the time. The downside, of course, is that you can get entangled in it and loose track. Just /scl trust clear to get out of that, or /scl trust list if you want to review who you'll trust for the next lock.

    Keep in mind that when you lock a chest for someone, using /scl as Bob for example, you are applying Bob's trust on the item. Keeping an up-to-date list of who he trusts is Bob's problem!

    You can combine combo-locking and trust just fine, and anyone not listed as trusted for that item will have to supply a valid combo.
    Configuration (open)

    Upon first run, the plugin will create plugins/SimpleChestLock/settings.yml
    Default values:
    Code:
    usePermissionsWhitelist: false
    checkUpdates: true
    whitelistMessage: true
    lockpair: true
    lockedChestsSuck: false
    suckRange: 3
    suckInterval: 100
    suckEffect: true
    verbose: false
    preventExplosions: true
    useProtectiveAuras: false
    key: 280
    keyDurability: 0
    comboKey: 352
    comboKeyDurability: 0
    useKeyDurability: false
    consumeKey: false
    openMessage: true
    useLimits: false
    lockLimits:
        example: 10
        anotherexample: 20
    lockables:
        lockable:
            - CHEST
            - DISPENSER
            - JUKEBOX
            - ENCHANTMENT_TABLE
            - BREWING_STAND
            - WORKBENCH
            - FURNACE
            - BURNING_FURNACE
            - LEVER
            - STONE_BUTTON
            - TRAP_DOOR
            - FENCE_GATE
            - STONE_PLATE
            - WOOD_PLATE
            - WOODEN_DOOR
            - BEACON
        protectiveAura:
            - CHEST
            - DISPENSER
        lockPair:
            - CHEST
            - WOODEN_DOOR
        lockVertical:
            - WOODEN_DOOR
        canSuck:
            - CHEST
            - DISPENSER
    usePermissionsWhitelist (boolean, default: false)
    true: Use permissions whitelist and players will only be able to lock blocks specially allowed by their beloved admin. See permission format and list of lockables to use above.
    false: All players can lock any of the lockable blocks.

    whitelistMessage (boolean, default: true)
    true: If a player attempts to lock a block he/she is not whitelisted for, a rather snappy red message is sent informing them of the error of their ways.
    false: If a player attempts to lock a block he/she is not whitelisted for nothing happens, not even a message, and certainly not any locking.

    lockpair (boolean, default: true)
    true: When locking one half of a double chest or double door, the other half is locked too.
    false: Each half is locked indevidually.

    lockedChestsSuck (boolean, default: true)
    true: Locked chests will attempt to "suck" objects in, causing them to disappear and go into the chest for storage. Intended for unattended farms, for example.
    false: Locked chests will leave everything alone, just as if it wasn't locked.
    Note that the sucking can be a little CPU-intensive on very large servers, so tune your suckRange and suckInterval (below) to suck shorter and less often if this gives you lag spikes.

    suckRange (meters, default: 3)
    Defines roughly the number of meters (blocks) away from a chest it will attempt to suck. This counts all directions in 3D, but with simplified math for performance, so it's not entirely accurate, but more than close enough.

    suckInterval (ticks, default: 100)
    Defines the number of ticks to wait between each suck attempt. Note that items must have existed at least one suckInterval before they can be sucked, so if your timing is exactly right you can have an item take exactly twice this time to get sucked in.
    On a well-tuned server there are 20 ticks per second, making the default a 5 second interval.

    suckEffect (boolean, default: true)
    true: When an item is moved from the ground to a chest, make a loud CLICK noise at the chest.
    false: OMGSTFU I CAN'T STAND THE CONSTANT CLICKING!!!!

    useWorldGuard (boolean, default: false)
    true: You need WorldGuard's build permission for the current region to lock stuff.
    false: WorldGuard is not consulted with regard to locking of blocks.

    verbose (boolean, default: false)
    true: The plugin will excessively inform you about all it's inner workings via the console.
    false: The plugin will keep it's console output to a minimum.
    Useful for tracking down problems, for example.

    checkUpdates (boolean, default: true)
    true: The plugin asks http://minecraft.webkonsept.com/plugins/ for the latest version of this plugin and tells you if the one you have isn't the newest release version.
    false: ET does not phone home.
    Note: The check happens when the plugin enables, meaning it only happens when you restart the server. If this is a popular feature I'll add a command to chek it as well.

    useProtectiveAuras (boolean, default: false)
    true: New blocks can not be placed next to locked ones.
    false: Only double-lockables are restricted in placement (old behavior).

    preventExplosions (boolean, default: true)
    true: The plugin will prevent explosions that would take out locked chests.
    false: Ignores explosions and just let them happen.
    Useful for when you have a different plugin protecting chests, or simply want people to be able to "blow the safe".

    useProtectiveAuras (boolean, default: false)
    true: The plugin will prevent the placement of any block right next to a locked block, unless you own that block.
    false: SCL does not meddle in the placement of blocks, meaning stuff like hoppers can be placed to extract items from locked chests.

    key and comboKey (item ID, defaults: 280 and 352)
    This is the item ID of your key. The defaults are Stick and Bone respectively.
    Use a listing like Minecraft Data Values to look up the ID of the item you want to use.

    useKeyDurability (boolean, default: false)
    true: Turn on durability checking (see below option)
    false: Turn the durability checking off.

    keyDurability and comboKeyDurability (damage value, default: 0)
    If your key is an item with multiple durability states, such as a custom Spout item or a sapling, you can use these settings to tune exactly what damage value you want to lock/unlock with.
    Does nothing unless useKeyDurability (above) is enabled.

    consumeKey (boolean, default: false)
    true: When you lock a block, the key disappears in payment of locking.
    false: Locking just locks, and does not eat the key.

    openMessage (boolean, default: true)
    true: A message is displayed when you open a chest, letting you know it's locked, who owns it (if it's not you) and who is trusted to access it besides you (if it's yours).
    false: Opening a chest you have access to gives no chat message.
    Note that regardless of this setting, a message is given if access was denied.

    useLimits (boolean, default: false)
    true: lockLimits as described in "Using limits" below are applied.
    false: all lockLimits are ignored and all users can lock whatever they please.

    lockLimits (configuration section, default is just an example)
    For details on this, please see then "Using limits" spoiler below.
    Using combinations (open)
    Combos are made of wool. To use them, set the first three items in your hotbar as wool. The combination is the colors of the wool.
    Use a bone (by default) to lock with that combination.

    If the setting openMessage is enabled, opening something you locked with a combination will show you the combo.
    To open something someone else locked with a combination you have to have three pieces of wool in the beginning of your hotbar. If you do, you're granted access as if you owned it, with no restrictions.
    If the combination is wrong, you'll be notified.
    Using limits (open)
    To use limits you have to use both permissions and options.
    First, let's have a look at the options.
    Code:
    lockLimits:
        example: 10
        anotherexample: 20
    Here, example and anotherexample are lock limit names.
    Keep an eye on these names when we move into the permissions.

    Remember that these permissions settings might not work with your permissions plugin, and is just an example.
    Code:
    users:
        someUser:
            permissions:
                simplechestlock.locklimit.example
        someOtherUser:
            permissions:
                simplechestlock.locklimit.anotherexample
      oneMoreUser:
            permissions:
                simplechestlock.locklimit.anotherexample
                simplechestlock.locklimit.example
        anAdmin:
            permissions:
                simplechestlock.nolocklimit
    Now someUser can lock 10 items, someOtherUser can lock 20 and oneMoreUser can lock 10 for example and 20 for anotherexample, for a total of 30.
    anAdmin can lock however much he/she wants, because of the nolocklimit permission.

    For details on the lockables section, see the "Configure lockables" above.


    Changelog:
    Version 1.2.2
    • Updated "Check for update" libs and compiled against newer bukkit.
    • Tested and found working very well with both 1.4.7 and 1.5.x
    Version 1.2.1
    • Removed some debug info output accidentally left in (right click entities message)
    Version 1.2
    • Optionally projects an "aura" around locked items. This is for stuff like Tekkit, so pipes can't be placed on chests to pump out the goodies inside.
    • Phones home to ask if there's a new version yet, so it can tell you when it's update time.
    • Some work done on entity protection, but nothing working yet.
    Version 1.1.1
    • (1.1.0 was never released due to bugs)
    • More consistent lockables checks
    • Performance improvements for lock checks
    • Explosion protection is now optional
    Version 1.0.2
    • albatrossen fixed invalid block IDs and added support for numerical IDs (both in "lockables" configuration)
    Version 1.0.1
    • Fixed where interacting with a combo-locked chest could generate a NullPointerException. Thanks to Wondrej for a detailed bug report making it easy to reproduce.
    Version 1.0.0
    • Option to check for WorldGuard build permission before allowing locking
    • Fix for item dupe bug if users are exceptional at item pickup timing and sucking is on
    • Fix for item consumption not happening if you have more than one in your hand.
    • Configurable locking, finally! You can now set what blocks are lockable!
    Version 0.20.1
    • Fixed bug where people could break blocks they didn't own.
    Version 0.20
    • Implemented group trust
    • Implemented key consumption
    • A good deal of cleanup internally, and some minor fixes.
    Version 0.19
    • Implemented suckInterval and suckEffect settings
    • Implemented whitelistMessage setting
    Version 0.18
    • Implemented limiting system so you can control how many items each user can lock
    • Made it possible to specify the durability ("Damage value") of keys, enabling the use of (for example) Spout custom items.
    (Older versions were stripped due to post size limitations)
     
  2. Offline

    DemmyDemon

    Haha, how about lockRejectionMessage or youKnowThatMessageThatSaysYouCanNotLockStuffWellThisTurnsItOff

    Seriously though, how about a hybrid of two of yours: whitelistMessage?
     
  3. Offline

    kohina

    Sounds good :p
     
  4. Offline

    deathwing911

    heya , was wondering , i use your plugin on my pvp server and its doing great but except one thing it seems that the chest data base resets everytimes i use scl in a other world. So the question is is this plugin MultiWorld supported?
    If so;
    how can i fix this data not saving even after the /scl save command with a confirmation that it has saved ? thanks
    PS: been using this plugin for lots of time keep up the good work
     
  5. Offline

    blipman17

    if a (new placed) button is pressed, and the door is opening, you could make a script that will find out who pressed the button, and therefore it can determ if that person is the real owner.

    now, this is just a button, but if you got a whole redstone circuit, i also don't have any clue how to solve that.
    maybe some script that monitors when a redstone circuit is activated, and whatches who activated that redstone circuit.
    then you can get on the same principe as with the button.

    great plugin

    srry for bad English, i'm from holland
     
  6. Offline

    DemmyDemon

    I've been testing and testing, but I can't reproduce this problem. It locks just fine in all my 3 worlds on my production server, and I made about 12 on my test server without any issues.
    What version are you running? Can you please do /scl save Something.txt and then compare that file to Chests.txt?
    Any difference? What is missing?

    "The real owner" would be the person that locked it, not the person that placed it. I help users with redstone all the time, and then it's up to them to lock the buttons and levers afterwards.

    Seems like what you need is WorldGuard to protect your redstone circuitry so your button locking is respected.

    0.19 published.
    It was delayed a long while as I had a lot of my wife's family visit us for Easter, and it's hard to get anything done with the horde-in-law visiting, let alone any serious plugin testing.

    There might be an issue with loading/saving, as reported by deathwing911, but I've been unable to reproduce. Anyone else seeing this?

    Edit: Oh, btw, I updated the Configuration part of the OP, as it was starting to get a little crowded with the "casual" explanation of options.

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jul 16, 2016
  7. Offline

    deathwing911

    maybe it can help , im using the plugin MyWorlds for multiWorld function.
    Even when im using the command it just out of nowhere without error the Txt files just resets.
     
  8. Offline

    ACStache

    I lol'd pretty hard at the suckEffect description :D
    Thanks for all the work you've put into this Demmy ^_^
     
  9. Offline

    eterneSoul

    I have tried every possible combination I can think of with the locklimit feature as well as scoured this thread trying to figure out if I'm doing something wrong. Your instructions state that the permission line used does not have a "t" ("simplecheslock.limit.____"). I have gone ahead and tried both with and without with no success. Can I put this line under a group's permission *see below*? Or do I have to put this under every new user?

    I believe I am using the lastest version of both CraftBukkit (1.2.5-R1.0) and PermissionsBukkit (1.6).

    groups:
    groupname:
    permissions:
    simplechestlock.locklimit.example: true
     
  10. Offline

    DemmyDemon

    You're very welcome, I hope it continues to serve you well.

    Oow, sorry about the typo. The actual check in the code is for simplechestlock.locklimit.groupname (where groupname, surprisingly, is the name of the locklimit group).
    With the T in there.

    Groups should work fine, but you also have to enable limits in the configuration. What is your config.yml like?
     
  11. Offline

    eterneSoul

    Not a problem. Typo's happen so I went ahead and took the initiative of trying with both to attempt to get it working.

    To be more specific, everything else is working. A player part of the USER group may lock only those they are allowed to lock. However, I cannot get the limit on the group working properly. I've even gone as far as to put the permissions in the player specific area rather than trying to target an entire group.

    Code:
    usePermissionsWhitelist: false
    lockpair: true
    lockedChestsSuck: true
    suckRange: 1
    suckInterval: 200
    suckEffect: true
    verbose: false
    key: 280
    comboKey: 352
    useKeyDurability: false
    keyDurability: 0
    comboKeyDurability: 0
    openMessage: true
    useLimits: true
    lockLimits:
        user: 6
        anotherexample: 20
    
    Would a permissions setup like this work?:

    Code:
    groups:
      preop:
        permissions:
          bukkit.command.reload: true
          bukkit.command.help: true
          bukkit.command.kick: true
          bukkit.command.ban: true
          bukkit.command.unban: true
          bukkit.command.op: true
          bukkit.command.teleport: true
          bukkit.command.give: true
          bukkit.command.list: true
          bukkit.command.say: true
          bukkit.command.time: true
          bukkit.command.gamemode: true
          bukkit.command.xp: true
          bukkit.command.plugins: true
        inheritance:
        - admin
      admin:
        permissions:
          permissions.*: true
          simplechestlock.*: true
          simplechestlock.command.status: true
          simplecheslock.nolocklimit: true
          permissions.help: true
        inheritance:
        - user
      user:
        permissions:
          bukkit.command.kill: false
          permissions.build: true
          simplechestlock.command.trust: true
          simplechestlock.command.status: false
          simplechestlock.usecombo: true
          simplechestlock.lock: true
          simplechestlock.locklimit.user: true
          simplechestlock.locktype.chest: true
          simplechestlock.locktype.lever: true
          simplechestlock.locktype.stone_button: true
          simplechestlock.locktype.trap_door: true
          simplechestlock.locktype.wood_plate: false
          simplechestlock.locktype.stone_plate: false
          simplechestlock.locktype.fence_gate: false
        worlds:
          creative:
        inheritance:
        - default
      default:
        permissions:
          simplechestlock.lock: false

    +1 for quick responses. :]
     
  12. Offline

    DemmyDemon

    That should work fine, actually.
    What exactly is it that doesn't work?
    It doesn't limit users, or it limits them to less than 6 locks? Any error or permission denial messages?
     
  13. Offline

    Jacob173741824

    "OMG JAVA! The file I just created DOES NOT EXIST?! Damn." Best exception message I have ever seen :D
     
  14. Offline

    DemmyDemon

    :eek: Are you actually getting that exception? That should be physically impossible.
     
  15. Offline

    OESGamer

    Hey Demmy Demon I have having alot of trouble using this on my server can you write of some installation instructions or an instructional video please I am so confused!!! Thanks
     
  16. Offline

    DemmyDemon

    I already documented the plugin. It's in the first post.
    If you have actual questions, please ask them.
     
  17. Offline

    Dzinglis

    Hey how to add this plugin for defaul players not only for admin ?
     
  18. Offline

    DemmyDemon

    Give the users the permissions you want them to have, using your permissions handler.
     
  19. Offline

    Jacob173741824

    No I was looking through your source code :)
     
  20. Offline

    blipman17

    thanx for the advice

    could you make beds and craftingtables 'ownable'?
    i don't want a stranger waking up in my bed, or someone breaking in in my house and use my craftingtable.
    i know i can use other plugins for my house, but it should be nice if you could make a craftingtable ownable.
     
  21. Offline

    DemmyDemon

    *PHEW*

    Lock the door?
    Anyway, sure, I could do that, I guess. Watch out for it in the next release.
    It's not something I'll do an extra release for, mind you.
     
  22. Offline

    MrDeathslider

    Verry Good Plugin I use it for My Server and it Works Good Thanks:D
     
  23. Offline

    DemmyDemon

    Glad you like it. Enjoy to the extent possible!
     
  24. Offline

    SailboatODoom

    I'm new to running a server and was wondering how I can allow others who join my server to use this lock feature. I can, as an OP, but no one else can. Is there a command to allow specific users to use this feature? I also read something about a permissions plugin? Not sure what that is. Thanks.
     
  25. Offline

    DemmyDemon

    In order to give permissions you do need a permissions plugin.
    I've recently switched to bPermissions, and I'm super-happy with it. Note that due to how this is solved in Bukkit you can use a wide variety of permissions plugins, so you might want to shop around.
     
  26. Offline

    Jacob173741824

    Hey I wrote some code for the plugin I'm working on, I just added some basic chest protection. I made it so you only have to hit one side of a chest and it locks the entire double chest. My code uses an sql server to save the chest location but you can use the code that checks and locks the second half of the chest. I think it would much improve this plugin, anyway here is my code: http://codeviewer.org/view/code:24d9
     
  27. Offline

    Cidvond

    Is there anyway to turn off / disable the spamming text that says "Access grated to ITEM. Trusted for Access: PLAYER" My player base is saying that is comes up TOO much when they are looking trough their chest / furnaces. Maybe add a way to disable it or possibly make it so you have to use another item to check the trust list on the locked items.
     
  28. Offline

    DemmyDemon

    Take a guess what the lockpair setting does. SCL already does this, but thanks.



    That's the exact purpose of the openMessage setting. Please read the documentation.
     
  29. Offline

    Jacob173741824

    My bad, I read that and thought it said for all chests.......
     
  30. Offline

    DemmyDemon

    Appreciate the heads up, but it does say "depending on settings" :)
     
  31. Offline

    Cidvond

    Did not see that thank you!
     

Share This Page